Antibacterial effect of PEO coating with silver on AA7075

被引:36
|
作者
Cerchier, P. [1 ]
Pezzato, L. [1 ]
Brunelli, K. [1 ]
Dolcet, P. [2 ,3 ]
Bartolozzi, A. [1 ]
Bertani, R. [1 ]
Dabala, M. [1 ]
机构
[1] Univ Padua, Dept Ind Engn, Via Marzolo 9, I-35131 Padua, Italy
[2] Univ Padua, Dept Chem Sci, INSTM, UdR Padova, Padua, Italy
[3] ICMATE CNR, Padua, Italy
来源
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | 2017年 / 75卷
关键词
PLASMA ELECTROLYTIC OXIDATION; NANOPARTICLES; ALUMINUM; RESISTANCE; PARTICLES; MECHANISM; ALLOY; AGENT; ION;
D O I
10.1016/j.msec.2017.02.084
中图分类号
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号
0805 ; 080501 ; 080502 ;
摘要
In this work, plasma electrolytic oxidation (PEO) coatings were produced on AA7075 using alkaline solution containing silicates compounds and silver micrometric particles in order to give to the coating an antimicrobial effect. In the optic of circular economy, silver chloride derived from the acid pre-treatment of electronic scraps was used as raw material and successively silver powders were synthesized from silver chloride solution using glucose syrup as reducing agent. The coatings were characterized by scanning electron microscope (SEM), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), potentiodynamic polarization test and antimicrobial tests. The results evidenced that the obtained coatings were homogenous and give to the samples higher corrosion resistance than untreated alloy. The silver particles, found both inside and outside of the pores that characterize the PEO layer, produced an efficacious antimicrobial effect both against E. coli and S. aureus. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:554 / 564
页数:11
相关论文
共 50 条
  • [1] Fabrication of multifunctional black PEO coatings on AA7075 for spacecraft applications
    Arunnellaiappan, T.
    Krishna, Rama L.
    Anoop, S.
    Rani, Uma R.
    Rameshbabu, N.
    SURFACE & COATINGS TECHNOLOGY, 2016, 307 : 735 - 746
  • [2] The effect of temper on the first breakdown in AA7075
    Zhao, Zhijun
    Frankel, G. S.
    CORROSION SCIENCE, 2007, 49 (07) : 3089 - 3111
  • [3] Taguchi optimization of PEO process parameters for corrosion protection of AA7075 alloy
    Songur, Fatma
    Arslan, Ersin
    Dikici, Burak
    SURFACE & COATINGS TECHNOLOGY, 2022, 434
  • [4] Tribological behaviour of thermally sprayed nano zirconia coating on AA7075
    Sankar, S. Lakshmi
    Ramesh, B.
    Kumar, J. V. Sai Prasanna
    Narayanamoorthy, K.
    Saxena, Kuldeep K.
    Arun, K.
    Balguri, Praveen Kumar
    Vardhan, T. Vishnu
    Mathiyalagan, P.
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2024, 18 (04) : 333 - 348
  • [5] Development of thermal control coatings on AA7075 by plasma electrolytic oxidation (PEO) process
    Ramakrishnan, E.
    Premchand, C.
    Manojkumar, P.
    Rameshbabu, N.
    MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 1085 - 1090
  • [6] Fabrication of corrosion resistant hydrophobic ceramic nanocomposite coatings on PEO treated AA7075
    Arunnellaiappan, T.
    Arun, S.
    Hariprasad, S.
    Gowtham, S.
    Ravisankar, B.
    Krishna, Rama L.
    Rameshbabu, N.
    CERAMICS INTERNATIONAL, 2018, 44 (01) : 874 - 884
  • [7] The effect of inhibitor structure on the corrosion of AA2024 and AA7075
    Harvey, T. G.
    Hardin, S. G.
    Hughes, A. E.
    Muster, T. H.
    White, P. A.
    Markley, T. A.
    Corrigan, P. A.
    Mardel, J.
    Garcia, S. J.
    Mol, J. M. C.
    Glenn, A. M.
    CORROSION SCIENCE, 2011, 53 (06) : 2184 - 2190
  • [8] Effect of temper on the distribution of pits in AA7075 alloys
    Dey, Swapna
    Gunjan, Manoj K.
    Chattoraj, Indranil
    CORROSION SCIENCE, 2008, 50 (10) : 2895 - 2901
  • [9] Investigation into Heat Treatment and Residual Stress in Laser Clad AA7075 Powder on AA7075 Substrate
    Cottam R.
    Luzin V.
    Liu Q.
    Wong Y.C.
    Wang J.
    Brandt M.
    Metallography, Microstructure, and Analysis, 2013, 2 (04) : 205 - 212
  • [10] Effect of tool coating on interfacial heat transfer coefficient in hot stamping of AA7075 aluminium alloys
    Liu, Xiaochuan
    El Fakir, Omer
    Gharbi, Mohammad M.
    Wang, LiLiang
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1127 - 1133