Continuous frictional angular extrusion and its application in the production of ultrafine-grained sheet metals

被引：55
作者：
Huang, Y.
Prangnell, P. B.
机构：
[1] Confae Technol Ltd, Altrincham WA14 5AP, Cheshire, England
[2] Univ Manchester, Manchester Mat Sci Ctr, Manchester M17 HS, Lancs, England
来源：
SCRIPTA MATERIALIA | 2007年 / 56卷 / 05期
基金：
英国工程与自然科学研究理事会;
关键词：
continuous frictional angular extrusion; SPD; aluminium; ultrafine-grained structure; EBSD;
D O I：
10.1016/j.scriptamat.2006.11.011
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A novel continuous severe deformation processing technique, continuous frictional angular extrusion (CFAE), has been developed for producing ultrafine-grained materials with high productivity. An investigation into the feasibility of this technique for processing sheet metals has been carried out using commercially pure aluminium. A uniform ultrafine-grained structure with an average grain size of similar to 0.6 mu m was achieved in the material after a true strain of 6.6. The evolution and homogeneity of the deformation structure and texture during processing are reported. (c) 2006 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：333 / 336
页数：4
相关论文
共 13 条
[1]  
GREEN D, 1973, Patent No. 1370894
[2]  
Hatherly M., 1979, An Introduction to Textures in Metals
[3]   MECHANISM OF DEFORMATION AND DEVELOPMENT OF ROLLING TEXTURES IN POLYCRYSTALLINE FCC METALS .2. SIMULATION AND INTERPRETATION OF EXPERIMENTS ON THE BASIS OF TAYLOR-TYPE THEORIES [J].
HIRSCH, J ;
LUCKE, K .
ACTA METALLURGICA, 1988, 36 (11) :2883-2904
[4]  
HUANG W, 2001, MAT SCI ENG A-STRUCT, V307, P87
[5]   Developing stable fine-grain microstructures by large strain deformation [J].
Humphreys, FJ ;
Prangnell, PB ;
Bowen, JR ;
Gholinia, A ;
Harris, C .
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1999, 357 (1756) :1663-1680
[6]   Controlling the textures of the metal strips via the continuous confined strip shearing (C2S2) process [J].
Lee, JC ;
Seok, HK ;
Han, JH ;
Chung, YH .
MATERIALS RESEARCH BULLETIN, 2001, 36 (5-6) :997-1004
[7]   Continuous recrystallisation of lamellar deformation structures produced by severe deformation [J].
Prangnell, PB ;
Hayes, JS ;
Bowen, JR ;
Apps, PJ ;
Bate, PS .
ACTA MATERIALIA, 2004, 52 (11) :3193-3206
[8]   Ultra-fine grain structures in aluminium alloys by severe deformation processing [J].
Prangnell, PB ;
Bowen, JR ;
Apps, PJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :178-185
[9]   Continuous processing of ultrafine grained Al by ECAP-Conform [J].
Raab, GJ ;
Valiev, RZ ;
Lowe, TC ;
Zhu, YT .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 382 (1-2) :30-34
[10]   Engineering and commercialization of equal channel angular extrusion (ECAE) [J].
Segal, VM .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 386 (1-2) :269-276
12