Deformation and failure mechanism of dynamically loaded sandwich beams with aluminum-foam core

被引：89

作者：

Yu, JL ^{[1
]}

Wang, X ^{[1
]}

Wei, ZG ^{[1
]}

Wang, EH ^{[1
]}

机构：

[1] Univ Sci & Technol China, Key Lab Mech Behav & Design Mat, CAS, Hefei 230026, Anhui, Peoples R China

来源：

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING | 2003年 / 28卷 / 03期

关键词：

aluminum foam; foam core sandwich beams; dynamic response; impact failure; energy absorption;

D O I：

10.1016/S0734-743X(02)00053-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In this paper the response and failure of dynamically loaded sandwich beams with an aluminum-foam core is investigated experimentally. The dynamic compressive stress-strain curves of the core material, an open-cell aluminum foam, are obtained by an SHPB technique. No strain-rate sensitivity is found. Quasi-static and dynamic bending tests are carried out for sandwich beams made of aluminum skins with an aluminum foam core. The deformation and failure mechanism are revealed by 'frozen' test using stop blocks. It is found that due to large local indentation and damage the energy absorbing capacity of beams loaded dynamically is lower than that for quasi-static loading. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：331 / 347

页数：17

共 27 条

[21] STRUCTURE AND PROPERTIES OF AL-SIC FOAM
PRAKASH, O
SANG, H
EMBURY, JD
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 199 (02): : 195 - 203
[22] Effect of an ultralight metal filler on the bending collapse behavior of thin-walled prismatic columns
Santosa, S
Wierzbicki, T
[J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1999, 41 (08) : 995 - 1019
[23] Santosa S, 2000, ADV ENG MATER, V2, P223, DOI 10.1002/(SICI)1527-2648(200004)2:4<223::AID-ADEM223>3.0.CO
[24] 2-J
[25] Effects of solid distribution on the stiffness and strength of metallic foams
Simone, AE
Gibson, LJ
[J]. ACTA MATERIALIA, 1998, 46 (06) : 2139 - 2150
[26] The effects of cell face curvature and corrugations on the stiffness and strength of metallic foams
Simone, AE
Gibson, LJ
[J]. ACTA MATERIALIA, 1998, 46 (11) : 3929 - 3935
[27] On the mechanical performance of closed cell Al alloy foams
Sugimura, Y
Meyer, J
He, MY
BartSmith, H
Grenstedt, J
Evans, AG
[J]. ACTA MATERIALIA, 1997, 45 (12) : 5245 - 5259

← 1 2 3 →