Leaching assessment of road materials containing primary lead and zinc slags

被引:53
作者
Barna, R
Moszkowicz, P
Gervais, C
机构
[1] Ecole Mines, F-18013 Albi 9, France
[2] Inst Natl Sci Appl, LAEPSI, F-69621 Villeurbanne, France
关键词
D O I
10.1016/j.wasman.2004.07.014
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Characterisation of the leaching behaviour of waste-containing materials is a crucial step in the environmental assessment for reuse scenarios. In our research we applied the multi-step European methodology ENV 12-920 to the leaching assessment of road materials containing metallurgical slag. A Zn slag from an imperial smelting furnace (ISF) and a Pb slag from a lead blast furnace (LBF) are investigated. The two slags contain up to 11.2wt% of lead and 3.5wt% of zinc and were introduced as a partial substitute for sand in two road materials, namely sand-cement and sand-bitumen. At the laboratory scale, a leaching assessment was performed first through batch equilibrium leaching tests. Second, the release rate of the contaminants was evaluated using saturated leaching tests on monolithic material. Third, laboratory tests were conducted on monolithic samples under intermittent wetting conditions. Pilot-scale tests were conducted for field testing of intermittent wetting conditions. The results show that the release of Pb and Zn from the materials in a saturated scenario was controlled by the pH of the leachates. For the intermittent wetting conditions, an additional factor, blocking of the pores by precipitation during the drying phase is proposed. Pilot-scale leaching behaviour only partially matched with the laboratory-scale test results: new mass transfer mechanisms and adapted laboratory leaching tests are discussed. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:945 / 955
页数:11
相关论文
共 20 条