Solar light transmission of polymer optical fibers

被引:18
作者
Tekelioglu, Murat [1 ]
Wood, Byard D. [2 ]
机构
[1] Univ Nevada, Dept Mech Engn, Reno, NV 89557 USA
[2] Utah State Univ, Dept Mech & Aerosp Engn, Logan, UT 84322 USA
关键词
Hybrid lighting; Optical fibers; Light transmission; Solar lighting; SYSTEM;
D O I
10.1016/j.solener.2009.08.002
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Light transfer (10 m) has been shown in recent experiments that used large-core optical fibers. Theoretical models are not extensive, however, and a further correlation between the theory and experiments has not been given. In this paper, straight and bent fiber subsystem models are introduced with skew and meridional rays to predict the light transmission of POFs (plastic optical fibers). Such fibers have been realized, for example, in HSL (hybrid solar lighting) systems. The purpose of this paper is to combine the straight and bent fiber subsystems to estimate the light transmission of HSL systems. It is shown that meridional rays, for which the optical-loss parameters were estimated, better represent the experimental results compared to skew rays (+/- 5.3% vs +/- 24.7% of %-difference). Model predictions were compared with the results of a commercial software. Sensitivity analysis on the subsystems indicated the most-to-least significant parameters in light transmission. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2039 / 2049
页数:11
相关论文
共 19 条
[1]   Analysis of the decrease in attenuation achieved by properly bending plastic optical fibres [J].
Arrue, J ;
Zubia, J .
IEE PROCEEDINGS-OPTOELECTRONICS, 1996, 143 (02) :135-138
[2]   Light power behaviour when bending plastic optical fibres [J].
Arrue, J ;
Zubia, J ;
Fuster, G ;
Kalymnios, D .
IEE PROCEEDINGS-OPTOELECTRONICS, 1998, 145 (06) :313-318
[3]  
CANCELLIERI G, 1984, MEASUREMENTS OPTICAL, P1
[4]  
Coleman H. W., 1999, EXPT UNCERTAINTY ANA, P83
[5]  
DERLOFSKE JFV, 2004, OPT ENG, V43, P1503
[6]   Light leakage in optical fibers: Experimental results, modeling and the consequences for solar concentrators [J].
Feuermann, D ;
Gordon, JM ;
Huleihil, M .
SOLAR ENERGY, 2002, 72 (03) :195-204
[7]   Guide to selecting the appropriate type of light source model [J].
Jongewaard, MP .
MODELING AND CHARACTERIZATION OF LIGHT SOURCES, 2002, 4775 :86-98
[8]   Methods of tolerancing injection-molded parts for illumination systems [J].
Kaminski, ME ;
Koshel, RJ .
DESIGN OF EFFICIENT ILLUMINATION SYSTEMS, 2003, 5186 :61-71
[9]   Advanced topics in source modeling [J].
Kaminski, MS ;
Garcia, KJ ;
Stevenson, MA ;
Frate, M ;
Koshel, RJ .
MODELING AND CHARACTERIZATION OF LIGHT SOURCES, 2002, 4775 :46-57
[10]  
Koshel R.J., 2005, P SOC PHOTO-OPT INS, V5942, P1