A MEMS-based tracking milli-miffor for high-density optical disk drives

We present a new MEMS-based milli-mirror for precise tracking in high-density optical disk drives (ODDs). The device consists of a torsionally suspended mirror plate, one pair of torsion springs, which support the mirror plate and offer a restoring torque, and two pairs of electrodes attached to the mirror plate and glass substrate. The dimensions of mirror plate and torsion springs were determined so that a 5 V dc bias +/- 4.5 V ac drive voltage would provide the mirror with +/- 0.02 degrees rotation to transmit laser beam spot on spinning disk. The MEMS-based milli-mirror was successfully fabricated using MEMS technology. Displacement-voltage linearization scheme was implemented by differential voltage driving. The static and dynamic performances of mirror prototype, such as capacitance versus driving voltage, rotation angle versus driving voltage, and resonant frequency were characterized and compared well with the simulation solutions. The mechanical resonant frequency of the mirror is expected to be high enough to satisfy the requirement of the servo bandwidth of precise tracking-control in high-density blue-laser optical disk drive. (c) 2006 Elsevier B.V. All rights reserved.