Fluorinated silica glass ablated with ArF excimer laser at low fluence

被引：3
|
作者：
Awazu, Koichi
机构：
[1] Univ Tokyo, Sch Engn, Dept Engn Synth, Bunkyo Ku, Tokyo 1138656, Japan
[2] Natl Inst Adv Ind Sci & Technol, CAN FOR, Tsukuba, Ibaraki 3058562, Japan
来源：
JOURNAL OF NON-CRYSTALLINE SOLIDS | 2007年 / 353卷 / 02期
关键词：
laser-matter interactions; silica;
D O I：
10.1016/j.jnoncrysol.2006.11.002
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Amorphous SiO2 (a-SiO2) was formed by liquid-phase deposition (LPD) at room temperature. As a result of one shot of ArF excimer laser irradiation, LPD-formed a-SiO2 shows a threshold fluence for ablation of below than 200 mJ/cm(2), which is much lower than the threshold fluence (similar to 1 J/cm(2)) of a-SiO2 formed by thermal oxidation of silicon. Raman scattering spectroscopy revealed that two sharp lines at 495 cm(-1) and 606 cm(-1), respectively, labeled D-1 and D-2, had disappeared, and the main band at 430 cm(-1) was sharpened in LPD-formed a-SiO2. It is presumed that the fluorine broke the silica network, relaxing the Si-O-Si bond angle and dramatically reducing the threshold energy for ablation of a-SiO2. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：215 / 217
页数：3
相关论文
共 50 条
  • [21] SPECTRAL TUNING OF AN ARF EXCIMER LASER
    YE, C
    YUAN, CL
    SHANGGUAN, C
    DOU, AR
    CHINESE PHYSICS, 1982, 2 (01): : 230 - 231
  • [22] ARF EXCIMER LASER PROJECTION LITHOGRAPHY
    NAKAGAWA, H
    SASAGO, M
    TANI, Y
    ENDO, M
    KOGA, K
    HIRAI, Y
    NOMURA, N
    1989 SYMPOSIUM ON VLSI TECHNOLOGY: DIGEST OF TECHNICAL PAPERS, 1989, : 9 - 10
  • [23] Development of pellicle for ArF excimer laser
    Shigematsu, S
    Eda, A
    Nakagawa, H
    PHOTOMASK AND X-RAY MASK TECHNOLOGY V, 1998, 3412 : 405 - 419
  • [24] Pellicle for ArF excimer laser photolithography
    Sakurai, I
    Shirasaki, T
    Kashida, M
    Kubota, Y
    PHOTOMASK AND X-RAY MASK TECHNOLOGY VI, 1999, 3748 : 177 - 187
  • [25] Morphological and ablation characteristics of brass and fused silica after interaction with ArF excimer laser
    Shaheen, M. E.
    Gagnon, J. E.
    Fryer, B. J.
    OPTIK, 2022, 262
  • [26] Photo-chemical polishing of fused silica optics by using ArF excimer laser
    Murahara, M
    LASER-INDUCED DAMAGE IN OPTICAL MATERIALS: 2000, PROCEEDINGS, 2001, 4347 : 547 - 552
  • [27] Friction characteristics of rubbers ablated by excimer laser
    Sato, Y
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2000, 45 (01) : 47 - 51
  • [28] QUANTITATIVE ELEMENTAL ANALYSIS OF SOLID SAMPLES BY ARF-EXCIMER LASER-ABLATED ATOMIC EMISSION-SPECTROMETRY
    LEE, YL
    SNEDDON, J
    SPECTROSCOPY LETTERS, 1992, 25 (06) : 881 - 891
  • [29] Shock induced phenomena in high fluence femtosecond laser ablation of silica glass
    Hu, Haofeng
    Wang, Xiaolei
    Zhang, Nan
    Zhai, Hongchen
    Wang, Pan
    HIGH-POWER LASERS AND APPLICATIONS V, 2010, 7843
  • [30] Photosensitivity of gallium-doped silica core fiber to 193 nm ArF excimer laser
    Gunawardena, Dinusha S.
    Mat-Sharif, Khairul A.
    Tamchek, Nizam
    Lai, Man-Hong
    Omar, Nasr Y. M.
    Emami, Siamak D.
    Muhamad-Yasin, Shahrin Z.
    Zulkifli, Mohd I.
    Yusoff, Zulfadzli
    Abdul-Rashid, Hairul. A.
    Lim, Kok-Sing
    Ahmad, Harith
    APPLIED OPTICS, 2015, 54 (17) : 5508 - 5512
12345