Suppression of Ag Agglomeration on Pt-capped ITO/Ag Reflectors for Vertical-type Light-emitting Diodes

被引:7
作者
Jeong, Tak [1 ]
Lee, Sang Hern [1 ]
La, Hyun Haeng [1 ]
Jeong, Seong Hun [1 ]
Jhin, Jung Geun [1 ]
Baek, Jong Hyeob [1 ]
Park, Si-Hyun [2 ]
Lee, June Key [3 ]
机构
[1] Korea Korea Photon Technol Inst, LED Team, Kwangju 500460, South Korea
[2] Yeungnam Univ, Sch Elect Engn & Comp Sci, Gyeongbuk 712749, South Korea
[3] Chonnam Natl Univ, Dept Mat Sci & Engn, Kwangju 500757, South Korea
关键词
VLED; Vertical light-emitting diode; Reflector; Ag agglomeration; Pt; Capping layer; LASER LIFTOFF; OHMIC CONTACTS; POWER; FABRICATION;
D O I
10.3938/jkps.55.1615
中图分类号
O4 [物理学];
学科分类号
0702 ;
摘要
The optical output loss originating from Ag metal agglomeration in ITO/Ag reflectors was drastically reduced by inserting a Pt capping layer in vertical light-emitting diodes (VLEDs). The Pt-capped ITO/Ag reflectors showed good Ohmic properties to the p-GaN layer, having a low specific contact resistance of 7.2 x 10(-5) Omega.cm(2) after optimal annealing at 500 degrees C for 1 min. The ITO/Ag/Pt reflectors exhibited high thermal stability, in that nearly the same reflectivity, similar to 82% at 460 nm, was maintained after thermal annealing. On the other hand, in the ITO/Ag reflectors, the reflectivity was severely degraded to 65% by the annealing. Atomic force microscopy monitoring proved that Ag agglomeration was suppressed by the Pt capping layer, allowing the surface roughness to be kept below 1.0 nm after thermal annealing. After chip fabrication, the wafer-level output power of the VLEDs employing the ITO/Ag/Pt reflectors was about 57% higher than that of the VLEDs employing the ITO/Ag reflectors.
引用
收藏
页码:1615 / 1620
页数:6
相关论文
共 21 条
[11]   High-reflectance and thermally stable AgCu alloy p-type reflectors for GaN-based light-emitting diodes [J].
Kim, Hyunsoo ;
Baik, Kwang Hyeon ;
Cho, Jaehee ;
Lee, Jeong Wook ;
Yoon, Sukho ;
Kim, Hyungkun ;
Lee, Sung-Nam ;
Sone, Cheolsoo ;
Park, Yongjo ;
Seong, Tae-Yeon .
IEEE PHOTONICS TECHNOLOGY LETTERS, 2007, 19 (5-8) :336-338
[12]   Thermally stable and highly reflective AgAl alloy for enhancing light extraction efficiency in GaN light-emitting diodes [J].
Kim, JY ;
Na, SI ;
Ha, GY ;
Kwon, MK ;
Park, IK ;
Lim, JH ;
Park, SJ ;
Kim, MH ;
Choi, D ;
Min, K .
APPLIED PHYSICS LETTERS, 2006, 88 (04) :1-3
[13]   Thermally stable and highly reflective ITO/Ag-based ohmic contacts to p-GaN [J].
Kim, Sunjung ;
Jang, Jun-Ho ;
Lee, Jeong-Soo .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2007, 154 (11) :H973-H976
[14]  
LEE TG, 1907, ANAT REC, V1, P51
[15]   High-power GaN-mirror-Cu light-emitting diodes for vertical current injection using laser liftoff and electroplating techniques [J].
Lin, WY ;
Wuu, DS ;
Pan, KF ;
Huang, SH ;
Lee, CE ;
Wang, WK ;
Hsu, SC ;
Su, YY ;
Huang, SY ;
Horng, RH .
IEEE PHOTONICS TECHNOLOGY LETTERS, 2005, 17 (09) :1809-1811
[16]   HILLOCK FORMATION, HOLE GROWTH AND AGGLOMERATION IN THIN SILVER FILMS [J].
SHARMA, SK ;
SPITZ, J .
THIN SOLID FILMS, 1980, 65 (03) :339-350
[17]   Nitride-based high-power flip-chip LED with double-side patterned sapphire substrate [J].
Shen, C. F. ;
Chang, S. J. ;
Chen, W. S. ;
Ko, T. K. ;
Kuo, C. T. ;
Shei, S. C. .
IEEE PHOTONICS TECHNOLOGY LETTERS, 2007, 19 (9-12) :780-782
[18]   Enhancement in output power of blue gallium nitride-based light-emitting diodes with omnidirectional metal reflector under electrode pads [J].
Sheu, J. K. ;
Hung, I-Hsiu ;
Lai, W. C. ;
Shei, S. C. ;
Lee, M. L. .
APPLIED PHYSICS LETTERS, 2008, 93 (10)
[19]   Ohmic and degradation mechanisms of Ag contacts on p-type GaN -: art. no. 062104 [J].
Song, JO ;
Kwak, JS ;
Park, Y ;
Seong, TY .
APPLIED PHYSICS LETTERS, 2005, 86 (06) :1-3
[20]   Use of patterned laser liftoff process and electroplating nickel layer for the fabrication of vertical-structured GaN-based light-emitting diodes [J].
Wang, SJ ;
Uang, KM ;
Chen, SL ;
Yang, YC ;
Chang, SC ;
Chen, TM ;
Chen, CH ;
Liou, BW .
APPLIED PHYSICS LETTERS, 2005, 87 (01)