Orientation dependence of cyclic deformation behavior and dislocation structure in Ti-5at.% Al single crystals

被引:17
|
作者
Xiao, L [1 ]
Umakoshi, YK [1 ]
机构
[1] Osaka Univ, Grad Sch Engn, Dept Mat Sci & Engn, Suita, Osaka 5650871, Japan
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2003年 / 339卷 / 1-2期
关键词
ti single crystal; fatigue; slip; twin; dislocation;
D O I
10.1016/S0921-5093(02)00104-1
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Cyclic deformation behavior and substructure in single crystal Ti-5at.% Al alloy with different orientations fatigued at Deltaepsilon(1)/2 = 0.4% were examined. The selected loading orientation includes: single prism slip, A; double prism slips [2 (1) over bar(1) over bar0], B; pyramidal slip, C; and twinning [0001], D. The testing results show that the crystallographic orientation has a strong effect on the cyclic stress response and the plastic deformation mode of Ti-5at.% Al single crystals. The crystals displayed an initial cyclic hardening followed by a striking softening period, and then a saturation stage was reached in specimens A and B. In contrast, an obvious cyclic saturation stage was obtained after first cyclic hardening until to fracture in specimens C and D. Trace analysis on the surface of specimens with an optical microscope shows that the (1 (1) over bar 00) single prism slip was operated in specimen A during cycling. The (10 (1) over bar0) and (1 (1) over bar 00) double prism slips can be distinguished from the traces on the (0001) surface in specimen B. The (1 (1) over bar 01) pyramidal slip and the (1 (1) over bar 00) prism slip were activated simultaneously in specimen C. Twinning is the primary plastic deformation mode in specimen D. The twinning type includes: {11 (2) over bar1}, {10 (1) over bar1}, {11 (2) over bar2} and {10 (1) over bar2}. The substructure in the fatigued specimens was examined using TEM. Typical dislocation configuration is well developed saturation bundle structure (SBS) in specimen A, while it is the planar edge dislocations which are tangled on the primary (10 (1) over bar0) plane and arranged parallel to the [0001] direction in specimen B. Fully developed loop patches were formed in specimen C. Typical deformed structure was the twin bundles and dislocations among twins in specimen D. The effects of plastic deformation mode on the cyclic stress response and the corresponding dislocation configuration of Ti-5at.% Al single crystals are then discussed. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:63 / 72
页数:10
相关论文
共 50 条