Micromechanism characteristics of modified Al-Si coating by laser melt injection CeO2 nano-particles

被引：17

作者：

Wang, Hongyu ^{[1
]}

Zhao, Qian ^{[1
]}

Wang, Han ^{[1
]}

Cui, Wanli ^{[1
]}

Yuan, Xiaoming ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Mech Engn, 301 Xuefu Rd, Zhenjiang 212013, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2017年 / 319卷

基金：

中国国家自然科学基金;

关键词：

Al-Si coating; Micromechanism; In situ; Laser melt injection; Nano-CeO2; HIGH-TEMPERATURE CORROSION; THERMAL BARRIER COATINGS; HOT CORROSION; BASE SUPERALLOYS; BEHAVIOR; OXIDATION; RESISTANCE; METAL;

D O I：

10.1016/j.surfcoat.2017.03.071

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In order to improve the oxidation and corrosion resistance of metallic bonding layer, the in situ function gradient coating possessing the oxidation and corrosion resistance structure was fabricated on the surface of Al-Si coating by laser melt injection nano-CeO2. The micrograph, characteristic parameters of morphology and microdefect, microstructure of melten pool of modified Al-Si coating were investigated. The results show that the modified Al-Si coating can be prepared successfully. Optimum laser power, scanning speed and laser beam diameter was 150 W,1500 mm.min(-1) and 2 mm, respectively. The microscopic morphology and the characteristic parameters of molten zone were directly related to the conducting direction of the input energy. The plastic change of melten pool was the main reason for the total crack length at different levels. Increasing laser power properly was benefit for reducing the emergement of the crack. The method of introducing fine particles by laser melt injection almost brought no pore defects. The effect of the inner diffusion barrier was enhanced, and the outer layer was rich in rare earth and fine grains. (C) 2017 Elsevier B.V. All rights reserved.

引用

页码：88 / 94

页数：7

共 28 条

[1] Preparation and hot corrosion behaviour of an Al-gradient NiCoCrAlYSiB coating on a Ni-base superalloy [J].

Bao, Z. B. ;

Wang, Q. M. ;

Li, W. Z. ;

Liu, X. ;

Gong, J. ;

Xiong, T. Y. ;

Sun, C. .

CORROSION SCIENCE, 2009, 51 (04) :860-867

[2] The evolution of thermal barrier coatings - status and upcoming solutions for today's key issues [J].

Beele, W ;

Marijnissen, G ;

van Lieshout, A .

SURFACE & COATINGS TECHNOLOGY, 1999, 120 :61-67

[3] WCp/Ti-6Al-4V graded metal matrix composites layer produced by laser melt injection [J].

Chen, Yanbin ;

Liu, Dejian ;

Li, Fuquan ;

Li, Liqun .

SURFACE & COATINGS TECHNOLOGY, 2008, 202 (19) :4780-4787

[4] Preparation and hot corrosion behaviour of two Co modified NiAl coatings on a Ni-based superalloy [J].

Fan, Q. X. ;

Jiang, S. M. ;

Wu, D. L. ;

Gong, J. ;

Sun, C. .

CORROSION SCIENCE, 2013, 76 :373-381

[5] Damage growth triggered by interface irregularities in thermal barrier coatings [J].

Hille, Thomas S. ;

Nijdam, Thijs J. ;

Suiker, Akke S. J. ;

Turteltaub, Sergio ;

Sloof, Wim G. .

ACTA MATERIALIA, 2009, 57 (09) :2624-2630

[6] High temperature corrosion behaviour of a gradient NiCoCrAlYSi coating II: Oxidation and hot corrosion [J].

Jiang, S. M. ;

Li, H. Q. ;

Ma, J. ;

Xu, C. Z. ;

Gong, J. ;

Sun, C. .

CORROSION SCIENCE, 2010, 52 (07) :2316-2322

[7]

Kura Nishi T., 2005, J SURF COAT TECHNOL, V200, P2438

[8] Emerging materials and processes for thermal barrier systems [J].

Levi, CG .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2004, 8 (01) :77-91

[9]

Liu CS, 2007, CMES-COMP MODEL ENG, V17, P1

[10] Cyclic oxidation resistance of Ce/Co modified aluminide coatings on nickel base superalloys [J].

Liu, Zongjie ;

Zhao, Xiongsheng ;

Guo, Hongmei ;

Zhou, Chungen .

CORROSION SCIENCE, 2015, 94 :135-141

← 1 2 3 →