Effects of two-phase nanofluid model on convection in a double lid-driven cavity in the presence of a magnetic field

被引:40
作者
Alsabery, Ammar I. [1 ,2 ]
Armaghani, Taher [3 ]
Chamkha, Ali J. [4 ,5 ]
Sadiq, Muhammad Adil [6 ]
Hashim, Ishak [2 ]
机构
[1] Islamic Univ, Coll Tech Engn, Refrigerat & Air Conditioning Tech Engn Dept, Najaf, Iraq
[2] Univ Kebangsaan Malaysia, Fac Sci & Technol, Sch Math Sci, Bangi, Selangor, Malaysia
[3] Islamic Azad Univ, Mahdishahr Branch, Dept Mech Engn, Mahdishahr, Iran
[4] Prince Mohammad Bin Fahd Univ, Dept Mech Engn, Prince Sultan Endowment Energy & Environm, Al Khobar, Saudi Arabia
[5] Amer Univ Ras Al Khaimah, RAK Res & Innovat Ctr, Ras Al Khaymah, U Arab Emirates
[6] DCC KFUPM, Dept Math, Dhahran, Saudi Arabia
关键词
Mixed convection; Buongiorno model; Magneto-hydrodynamics; Double lid-driven; Thermophoresis and Brownian; MHD MIXED CONVECTION; HEAT-TRANSFER ENHANCEMENT; NON-NEWTONIAN NANOFLUID; SQUARE CAVITY; NATURAL-CONVECTION; AL2O3-WATER NANOFLUID; PARTIAL SLIP; ENCLOSURE; FLOW; SIMULATION;
D O I
10.1108/HFF-07-2018-0386
中图分类号
O414.1 [热力学];
学科分类号
摘要
Purpose The aim of this study is to investigate the effects of two-phase nanofluid model on mixed convection in a double lid-driven square cavity in the presence of a magnetic field. The authors believe that this work is a good contribution for improving the thermal performance and the heat transfer enhancement in some engineering instruments. Design/methodology/approach The current work investigates the problem of mixed convection heat transfer in a double lid-driven square cavity in the presence of magnetic field. The used cavity is filled with water-Al2O3 nanofluid based on Buongiorno's two-phase model. The bottom horizontal wall is maintained at a constant high temperature and moves to the left/right, while the top horizontal wall is maintained at a constant low temperature and moves to the right/left. The left and right vertical walls are thermally insulated. The dimensionless governing equations are solved numerically using the Galerkin weighted residual finite element method. Findings The obtained results show that the heat transfer rate enhances with an increment of Reynolds number or a reduction of Hartmann number. In addition, effects of thermophoresis and Brownian motion play a significant role in the growth of convection heat transfer. Originality/value According to above-mentioned studies and to the authors' best knowledge, there has no study reported the MHD mixed convection heat transfer in a double lid-driven cavity using the two-phase nanofluid model. Thus, the authors of the present study believe that this work is valuable. Therefore, the aim of this comprehensive numerical study is to investigate the effects of two-phase nanofluid model on mixed convection in a double lid-driven square cavity in the presence of a magnetic field. The authors believe that this work is a good contribution for improving the thermal performance and the heat transfer enhancement in some engineering instruments.
引用
收藏
页码:1272 / 1299
页数:28
相关论文
共 46 条
[1]   Mixed convection flow in a lid-driven inclined square enclosure filled with a nanofluid [J].
Abu-Nada, Eiyad ;
Chamkha, Ali J. .
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 2010, 29 (06) :472-482
[2]   Numerical study of mixed convection in an inclined two sided lid driven cavity filled with nanofluid using two-phase mixture model [J].
Alinia, M. ;
Ganji, D. D. ;
Gorji-Bandpy, M. .
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2011, 38 (10) :1428-1435
[3]   Effects of two-phase nanofluid model on MHD mixed convection in a lid-driven cavity in the presence of conductive inner block and corner heater [J].
Alsabery, A. I. ;
Ismael, M. A. ;
Chamkha, A. J. ;
Hashim, I. .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2019, 135 (01) :729-750
[4]   MHD convective heat transfer in a discretely heated square cavity with conductive inner block using two-phase nanofluid model [J].
Alsabery, A. I. ;
Sheremet, M. A. ;
Chamkha, A. J. ;
Hashim, I. .
SCIENTIFIC REPORTS, 2018, 8
[5]   Mixed convection of Al2O3-water nanofluid in a double lid-driven square cavity with a solid inner insert using Buongiorno's two-phase model [J].
Alsabery, Ammar I. ;
Ismael, Muneer A. ;
Chamkha, Ali J. ;
Hashim, Ishak .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 119 :939-961
[6]  
Bergman T.L., 2011, INTRO HEAT TRANSFER
[7]   Convective transport in nanofluids [J].
Buongiorno, J .
JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2006, 128 (03) :240-250
[8]   Effects of heat sink and source and entropy generation on MHD mixed convection of a Cu-water nanofluid in a lid-driven square porous enclosure with partial slip [J].
Chamkha, A. J. ;
Rashad, A. M. ;
Mansour, M. A. ;
Armaghani, T. ;
Ghalambaz, M. .
PHYSICS OF FLUIDS, 2017, 29 (05)
[9]   Mixed convection flow in single- and double-lid driven square cavities filled with water-Al2O3 nanofluid: Effect of viscosity models [J].
Chamkha, Ali J. ;
Abu-Nada, Eiyad .
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 2012, 36 :82-96
[10]   MHD Mixed Convection in a Lid-Driven Cavity Including a Heated Source [J].
Chatterjee, Dipankar .
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2013, 64 (03) :235-254