Gibbs energy calculation of electrolytic plasma channel with inclusions of copper and copper oxide with Al-base

被引:11
作者
Posuvailo, V. M. [1 ]
Klapkiv, M. D. [1 ]
Student, M. M. [1 ]
Sirak, Y. Y. [1 ]
Pokhmurska, H. V. [2 ]
机构
[1] NAS Ukraine, Karpenko Physicomech Inst, 5 Naukova Str, UA-79060 Lvov, Ukraine
[2] Tech Univ Chemnitz, Inst Mat Sci & Engn, D-09125 Chemnitz, Germany
来源
19TH CHEMNITZ SEMINAR ON MATERIALS ENGINEERING | 2017年 / 181卷
关键词
CERAMIC COATINGS; OXIDATION; LAYERS; AL2O3;
D O I
10.1088/1757-899X/181/1/012045
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The oxide ceramic coating with copper inclusions was synthesized by the method of plasma electrolytic oxidation (PEO). Calculations of the Gibbs energies of reactions between the plasma channel elements with inclusions of copper and copper oxide were carried out. Two methods of forming the oxide-ceramic coatings on aluminum base in electrolytic plasma with copper inclusions were established. The first method-consist in the introduction of copper into the aluminum matrix, the second-copper oxide. During the synthesis of oxide ceramic coatings plasma channel does not react with copper and copper oxide-ceramic included in the coating. In the second case is reduction of copper oxide in interaction with elements of the plasma channel. The content of oxide-ceramic layer was investigated by X-ray and X-ray microelement analysis. The inclusions of copper, CuAl2, Cu9Al4 in the oxide-ceramic coatings were found. It was established that in the spark plasma channels alongside with the oxidation reaction occurs also the reaction aluminothermic reduction of the metal that allows us to dope the oxide-ceramic coating by metal the isobaric-isothermal potential oxidation of which is less negative than the potential of the aluminum oxide.
引用
收藏
页数:10
相关论文
共 15 条
  • [1] Chernenko V I, 1991, PREPARATION COATINGS, P127
  • [2] Thermo-physical properties of plasma electrolytic oxide coatings on aluminium
    Curran, JA
    Clyne, TW
    [J]. SURFACE & COATINGS TECHNOLOGY, 2005, 199 (2-3) : 168 - 176
  • [3] Gurvich L V, 1978, THERMODYNAMIC PROPER, V1, P495
  • [4] Simulation of synthesis of oxide-ceramic coatings in discharge channels of a metal-electrolyte system
    Klapkiv, MD
    [J]. MATERIALS SCIENCE, 1999, 35 (02) : 279 - 283
  • [5] KLAPKIV MD, 1994, MATER SCI+, V30, P333, DOI 10.1007/BF00569685
  • [6] Larson A., 1994, GSAS GEN STRUCTURE A
  • [7] Abrasive wear/corrosion properties and TEM analysis of Al2O3 coatings fabricated using plasma electrolysis
    Nie, X
    Meletis, EI
    Jiang, JC
    Leyland, A
    Yerokhin, AL
    Matthews, A
    [J]. SURFACE & COATINGS TECHNOLOGY, 2002, 149 (2-3) : 245 - 251
  • [8] Identification of the band emission spectra under the conditions of synthesis of Al2O3 in electrolytic plasmas
    Posuvailo, VM
    Klapkiv, MD
    [J]. MATERIALS SCIENCE, 1997, 33 (03) : 383 - 385
  • [9] Luminescence of the B2 Σ+-X2 Σ+ band system of AlO during plasma electrolytic oxidation of aluminum
    Stojadinovic, S.
    Peric, M.
    Petkovic, M.
    Vasilic, R.
    Kasalica, B.
    Belca, I.
    Radic-Peric, J.
    [J]. ELECTROCHIMICA ACTA, 2011, 56 (27) : 10122 - 10129
  • [10] Student M, 2012, P 11 INT C EXH PROBL, P622