Physical Properties of Polyamide 6 Fibre Coated with Thermoplastic Polyurethane Thin Film

被引:0
作者
Furukawa, Mutsuhisa [1 ]
John, Baiju [1 ]
机构
[1] Nagasaki Univ, Grad Sch Sci & Technol, Div Mat Sci, Nagasaki 8528521, Japan
关键词
polyurethane thin film; polyamide; 6; fibre; interface interaction; thin film coating; crystallinity; mechanical properties; micro-cracks; POLYESTER POLYURETHANE; PHASE-TRANSITIONS; BLENDS; DEGRADATION; ELASTOMERS; NYLON-6;
D O I
暂无
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Polyamide 6 (PA6) monofilament fibres were coated with thermoplastic polyurethane (TPU) thin film. The TPU was prepared from poly (ethylene adipate) glycol, 4, 4'-diphenylmethane diisocyanate (MDI) and 1, 4-butanediol (BD) with an NCO Index of 1.05. The structural changes in the fibre were analysed by the microscope FT-IR ATR scanning mode. It was found that structural changes occurred in the PA6 fibres due to TPU coating. There was a transformation from an amorphous phase to the alpha-crystalline phase resulting in the increase of crystallinity of PA6 fibre. An increase in strength as well as elongation was observed in the case of TPU coated fibres. The Young's modulus too showed an increase in strength. The improvement in the mechanical properties of coated PA6 was due to the crystalline changes in the fiber the annealing effect, the interface stiffening due to the interaction of the urethane group of TPU and the amide group of polyamide fiber as well as the role played by micro-cracks. The blending method is usually used for the performance improvement of PA6 fibres. The improvement of mechanical properties with a soft thin TPU coating seems very interesting and important. Also the TPU coated PA6 fibres had enhanced mechanical properties and possess a degradable nature when compared to the normal PA6 fibres.
引用
收藏
页码:151 / 163
页数:13
相关论文
共 50 条
[41]   Remarkable enhancement of mechanical and tribological properties of polyamide 46/polyphenylene oxide alloy by polyurethane-coated carbon fiber [J].
Ran, Jincheng ;
Lai, Xuejun ;
Li, Hongqiang ;
Zeng, Xingrong .
HIGH PERFORMANCE POLYMERS, 2019, 31 (9-10) :1122-1131
[42]   The Influence of Thermoplastic Starch and Banana Fibre Contents on Physical and Thermal Properties of LLDPE [J].
Kahar, A. W. M. ;
Salem, A. E. Abduati .
INTERNATIONAL CONFERENCE ON INNOVATIVE RESEARCH - ICIR EUROINVENT 2017, 2017, 209
[43]   Different component ratio of polyamide 1212/thermoplastic polyurethane blends: Effect on phase morphology, mechanical properties, wear resistance, and crystallization behavior [J].
Xu, Dinghong ;
Zhou, Ying ;
Guo, Jianbing ;
He, Weidi ;
Wu, Hongming ;
Qin, Shuhao ;
Yu, Jie .
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS, 2022, 35 (02) :249-260
[44]   Ionic Liquids Incorporating Polyamide 6: Miscibility and Physical Properties [J].
Zheng, Xin ;
Lin, Qingqing ;
Jiang, Pan ;
Li, Yongjin ;
Li, Jingye .
POLYMERS, 2018, 10 (05)
[45]   Tailoring the physical properties of poly(lactic acid) through the addition of thermoplastic polyurethane and functionalized short carbon fibers [J].
Simonini, L. ;
Mahmood, H. ;
Dorigato, A. ;
Pegoretti, A. .
POLYMER COMPOSITES, 2023, 44 (08) :4719-4733
[46]   Effect of dose and temperature on the physical properties of an aliphatic thermoplastic polyurethane irradiated with an electron beam [J].
Adem, E. ;
Angulo-Cervera, E. ;
Gonzalez-Jimenez, A. ;
Valentin, J. L. ;
Marcos-Fernandez, A. .
RADIATION PHYSICS AND CHEMISTRY, 2015, 112 :61-70
[47]   Effect of Composition Ratio on Properties of Self-Crimping Bicomponent Fibers Composed of Polyamide 6 and Thermoplastic Polyamide Elastomer [J].
Zhao, Man ;
Yang, Qian ;
Liao, Mengdie ;
Weng, Ming ;
Wang, Xiuhua .
FIBERS AND POLYMERS, 2025, 26 (08) :3441-3451
[48]   Synthesis and characterization of novel fluorinated thermoplastic polyurethane with high transmittance and superior physical properties [J].
Yang, Lijuan ;
Wang, Yiliang ;
Peng, Xiaohong .
JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY, 2017, 54 (08) :516-523
[49]   Evaluation of the mechanical properties of chopped carbon fibre reinforced polypropylene, polyethylene, polyamide 6, and polyamide 12 composites [J].
Ari, Ali ;
Bayram, Ali ;
Karahan, Mehmet ;
Karagoz, Secgin .
INDUSTRIA TEXTILA, 2023, 74 (02) :175-183
[50]   Mechanical and Physical Properties of Injection Molded Halloysite Nanotubes-Thermoplastic Polyurethane Nanocomposites [J].
Sulong, Abu Bakar ;
Gaaz, Tayser Sumer ;
Sahari, Jaafar .
WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, 2015, :2748-2752