Microstructure and Soil Wear Resistance of a Grey Cast Iron Alloy Reinforced with Ni and Cr Laser Coatings

被引:6
|
作者
Paczkowska, Marta [1 ]
Selech, Jaroslaw [1 ]
机构
[1] Poznan Univ Tech, Inst Machines & Motor Vehicles, Dept Transport & Civil Engn, Piotrowo 3, PL-60965 Poznan, Poland
关键词
laser modification; nickel; chromium; grey iron; tribological behaviour properties; agriculture machine parts; SURFACE; HARDNESS; POWER;
D O I
10.3390/ma15093153
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The goal of the presented investigation was to assess the impact of surface laser modification with the implementation of nickel and chromium on the microstructure and tribological behaviour of grey iron. Surface laser modification consisted of remelting the surface layer with simultaneous implementation of selected elements. In the first variant of treatment only nickel was implemented and in the second one, a combination of nickel with chromium together. This treatment was performed on an agriculture machine part made of grey iron and working in intensive friction conditions. The constituted surface layer was characterized by about 0.45 mm of depth and a 160 mm(2) area of the most exposed to wear of the treated part. In the case of both types of variants, the achieved surface layer microstructure was identified as homogenized with small grains. It involved nickel in the first variant of modification and nickel and chromium in the second one. The attained microstructure with nickel addition was characterized by nearly 800 HV0.1 of hardness (a 3.6-fold increase in comparison to its core material). The approximate hardness of 900 HV0.1 was achieved in the case of the microstructure enriched with nickel and chromium (over a 4-fold increase in comparison to the core material). The roughness of the surface after laser modification was reduced (nearly 3-fold) in comparison to the original surface of the part that was characterized by quite substantial coarseness. The wear test showed that Ni and Cr laser coatings increased resistance to abrasive wear resulting from the modification of the microstructure by the formation of martensite and grain fragmentation. Laser modified parts had a 2.5-fold smaller mass loss than untreated parts. Both types of performed variants: with the implementation of nickel and a combination of nickel and chromium gave comparable effects.
引用
收藏
页数:14
相关论文
共 50 条
  • [1] Effect of vanadium on microstructure and wear resistance of Ni-Cr alloyed cast iron
    Wu, L. L.
    Xiao, F. R.
    Wang, Y. C.
    Liang, C. B.
    Sun, G. P.
    Liao, B.
    INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2013, 26 (03) : 176 - 183
  • [2] Microstructure and Wear Behavior of NbC-Reinforced Ni-Based Alloy Composite Coatings by Laser Cladding
    Pizzatto, Alex
    Teixeira, Moises Felipe
    Rabelo, Alexsandro
    Falcade, Tiago
    Scheid, Adriano
    MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2021, 24 (03):
  • [3] Effect of Cr, Mo and Al on Microstructure, Abrasive Wear and Corrosion Resistance of Ni-Mn-Cu Cast Iron
    Medynski, Daniel
    Samociuk, Bartlomiej
    Janus, Andrzej
    Checmanowski, Jacek
    MATERIALS, 2019, 12 (21)
  • [4] Research on the Alkali Corrosion Resistance Mechanism of Ni-Cr-Cu alloy Cast Iron
    Yao, Junping
    Zhong, Sun
    FRONTIERS OF MANUFACTURING SCIENCE AND MEASURING TECHNOLOGY, PTS 1-3, 2011, 230-232 : 1298 - 1302
  • [5] Study of the effect of overlap rate on the failure form, microstructure and wear resistance of multilayer laser cladding on grey cast iron surfaces
    Wei, Runze
    Mao, Muhua
    Liang, Jianguo
    Zhao, Chunjiang
    Ouyang, Changyao
    Wang, Rui
    Bai, Qiaofeng
    Deng, Rui
    Li, Huan
    Bian, Qiang
    TRIBOLOGY INTERNATIONAL, 2024, 194
  • [6] Electrodeposition of nanocrystalline Ni and NiCr alloy coatings: Effects of Cr content on microhardness and wear resistance improvement
    Liu, Zhan
    Zhang, Qicheng
    Zhang, Xingwen
    Yu, Zhifei
    Zhang, Xiaowei
    Mao, Qingzhong
    Nie, Jinfeng
    Zhao, Yonghao
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 3584 - 3593
  • [7] Effect of Ni on microstructure and wear behaviour of 13Cr-W-Mo-2C white cast iron
    Teker, Tanju
    Yilmaz, S. Osman
    REVISTA DE METALURGIA, 2023, 59 (02)
  • [8] Wear Resistance of Ni-Based Alloy Coatings
    Yu, Jinku
    Wang, Yuehua
    Zhao, XiCan
    Li, Qinyang
    Qiao, Qi
    Zhao, Jia
    Zhai, Sen
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2019, 2019
  • [9] Microstructure and wear resistance of highchromium cast iron containing niobium
    Zhang Zhiguo
    Yang Chengkai
    Zhang Peng
    Li Wei
    China Foundry, 2014, (03) : 179 - 184
  • [10] Microstructure and Wear Resistance of Ni-WC-TiC Alloy Coating Fabricated by Laser
    Liu, Yu
    Li, Zeyu
    Li, Guohui
    Du, Fengming
    Yu, Miao
    LUBRICANTS, 2023, 11 (04)