Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels

被引：17

作者：

Foroozmehr, Fayaz ^{[1
]}

Verreman, Yves ^{[1
]}

Chen, Jianqiang ^{[1
]}

Thibault, Denis ^{[2
]}

Bocher, Philippe ^{[3
]}

机构：

[1] Ecole Polytech Montreal, CP 6079,Succ Ctr Ville, Montreal, PQ H3C 3A7, Canada

[2] Inst Rech Hydro Quebec, 1800 Bout Lionel Boulez, Varennes, PQ J3X 1S1, Canada

[3] ETS, Montreal, PQ H3C 1K3, Canada

来源：

ENGINEERING FRACTURE MECHANICS | 2017年 / 175卷

基金：

加拿大自然科学与工程研究理事会;

关键词：

Fracture toughness; Microstructure; Martensitic stainless steels; Inclusions; TRIP effect; TOUGHNESS; MICROSTRUCTURE; STRENGTH;

D O I：

10.1016/j.engfracmech.2017.02.002

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Microstructures and inclusion characteristics of cast and wrought 13% Cr-4% Ni martensitic stainless steels were related to tensile, fracture toughness J(Ic), and Charpy V-notch absorbed energy. A lower volume fraction of inclusions, a larger number of inclusions smaller than 10 mu m, and a more resistant inclusion type against rupture and against micro-void formation were the key parameters explaining why the wrought steel has better mechanical properties than the cast steel. It has been shown that TRIP effect occurs only in a small region of 6 mm length from the crack plane in J(Ic)-test. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：262 / 278

页数：17

共 50 条

[11] In situ investigation on the deformation-induced phase transformation of metastable austenite in Fe-13% Cr-4% Ni martensitic stainless steel
Zhang, Shenghua
Wang, Pei
Li, Dianzhong
Li, Yiyi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 635 : 129 - 132
[12] Corrosion resistance of 13wt.% Cr martensitic stainless steels: Additively manufactured CX versus wrought Ni-containing AISI 420
Shahriari, Ayda
Ghaffari, Mahya
Khaksar, Ladan
Nasiri, Ali
Hadadzadeh, Amir
Amirkhiz, Babak Shalchi
Mohammadi, Mohsen
CORROSION SCIENCE, 2021, 184 (184)
[13] Evaluation of crane wheels restored by hardfacing two distinct 13Cr-4Ni martensitic stainless steels
Bakhshayesh, M. Moshkbar
Farzadi, A.
Kalantarian, R.
Zargarzadeh, A.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 6067 - 6083
[14] Effect of delta ferrite on impact properties of low carbon 13Cr-4Ni martensitic stainless steel
Wang, P.
Lu, S. P.
Xiao, N. M.
Li, D. Z.
Li, Y. Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (13-14): : 3210 - 3216
[15] Tensile Properties of the Modified 13Cr Martensitic Stainless Steels
Mabruri, Efendi
Anwar, Moch. Syaiful
Prifiharni, Siska
Romijarso, Toni B.
Adjiantoro, Bintang
3RD INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS SCIENCE AND TECHNOLOGY (ICAMST 2015), 2016, 1725
[16] Behavior of Nb influence on structure and properties of 30Cr13 cast martensitic stainless steel
Yang-fan Jin
Tuo Zhang
Qi-yu Zang
Yi-tao Yang
Journal of Iron and Steel Research International, 2019, 26 : 462 - 471
[17] Behavior of Nb influence on structure and properties of 30Cr13 cast martensitic stainless steel
Jin, Yang-fan
Zhang, Tuo
Zang, Qi-yu
Yang, Yi-tao
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2019, 26 (05) : 462 - 471
[18] Corrosion and Tribological Behavior of Laser Processed 13Cr-4Ni and AISI 304 Stainless Steels
Singh, R.
Tiwari, S. K.
LASERS IN ENGINEERING, 2016, 35 (1-4) : 63 - 74
[19] Effect of Nitrogen on the Hot Deformation Behavior of 0.4C-13Cr Martensitic Stainless Steel
Liu, Weijian
Li, Jing
Li, Shouhui
Li, Jihui
Li, Xuejun
STEEL RESEARCH INTERNATIONAL, 2021, 92 (08)
[20] Effect of Aging on the Fracture Behavior of Lean Duplex Stainless Steels
Straffelini, G.
Baldo, S.
Calliari, I.
Ramous, E.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (11): : 2616 - 2621

← 1 2 3 4 5 →