Crack propagation in 3PB specimen made from welded joint

被引:2
作者
Arandelovic, M. [1 ]
Sedmak, S. A. [1 ]
Milovic, Lj [2 ]
Maksimovic, A. [3 ]
Bozic, Z. [4 ]
机构
[1] Fac Mech Engn, Innovat Ctr, Kraljice Marije 16, Belgrade 11120, Serbia
[2] Univ Belgrade, Fac Technol & Met, Karnegijeva 4, Belgrade 11120, Serbia
[3] Fac Technol & Met, Innovat Ctr, Karnegijeva 4, Belgrade 11120, Serbia
[4] Univ Zagreb, Fac Mech Engn & Naval Architecture, Ivan Lucica 5, Zagreb 10002, Croatia
来源
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 | 2020年 / 28卷
关键词
Digital image correlation; Crack propagation; Welded joint; Crack bifurcation;
D O I
10.1016/j.prostr.2020.10.051
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Crack propagation in 3PB specimen has been investigated experimentally by using Digital Image Correlation (DIC) technique. For this purpose, specimens were taken from butt welded plates, made of P460NL1 micro-alloyed steel. Fatigue pre-crack of 3PB specimens was introduced in the weld metal. Specimens were then statically loaded and analyzed using digital image correlation software ARAMIS to assess strain fields and crack propagation paths. Bifurcation of cracks was noticed as the main characteristics of crack prop-agation in the analyzed case. (C) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo
引用
收藏
页码:440 / 445
页数:6
相关论文
共 8 条
[1]  
Dordjevic B., 2015, 2 INT C MODERN METHO
[2]  
Gubeljak N, 2006, STRUCT INTEGR LIFE, V6, P65
[3]  
Jovicic R, 2015, STRUCT INTEGR LIFE, V15, P27
[4]  
Lozanovic J, 2009, TEH VJESN, V16, P93
[5]   ESTIMATION OF STRESS INTENSITY FACTOR BY DIGITAL IMAGE CORRELATION [J].
MCNEILL, SR ;
PETERS, WH ;
SUTTON, MA .
ENGINEERING FRACTURE MECHANICS, 1987, 28 (01) :101-112
[6]  
Milosevic M, 2012, CHEM LISTY, V106, pS485
[7]  
Mitrovic N, 2011, FME TRANS, V39, P55
[8]  
Sedmak A, 2012, STRUCT INTEGR LIFE, V12, P39