Effects of fluid-flow velocity and water quality on planktonic and sessile microbial growth in water hydraulic system

Water hydraulic systems use water instead of oil as a pressure medium. Microbial growth in the system may restrict the applicability this technology. The effects of fluid-flow velocity and water quality on microbial growth and biofilm formation were studied with a pilot-scale water hydraulic system. The fluid-flow velocities were 1.5-5.2 m/s and the corresponding shear stresses 9.1-84 N/m(2). The fluid-flow velocity had an insignificant effect on the total bacterial numbers and the numbers of viable heterotrophic bacteria in the pressure medium. Microbial attachment occurred under high shear stresses. The fluid-flow velocity did not affect the biofilm formation in the tank. Increase in the flow velocity decreased the bacterial densities on the pipe surfaces indicating preferable biofilm formation on areas with low flow velocity. Using ultrapure water as the pressure medium decreased the total cell numbers and resulted in slower growth of bacteria in the pressure medium. Lowering the nutrient concentration retarded biofilm formation but did not affect the final cell densities. The decreasing pressure medium nutrient concentration favoured microbial attachment in the tank instead of the pipelines. In conclusion, microbial growth and biofilm formation in water hydraulic systems cannot be controlled by the fluid-flow velocity or the quality of the pressure medium. (C) 2002 Elsevier Science Ltd. All rights reserved.