The role of DME addition on the evolution of soot and soot precursors in laminar ethylene jet flames

Dimethyl ether (DME) has received considerable attention as a fuel additive to reduce the emission of particulate matter (PM) due to its low-temperature chemistry, molecularly bound oxygen atom and the absence of C-C bonds. However, the effect of DME addition on the evolution of soot and particularly soot precursors is not entirely understood. This study aims to shed light on this issue by blending different proportions of DME with diffusion, E60, and partially premixed, PP12, base cases of laminar ethylene flames using the Yale benchmark burner. Laser-induced fluorescence (LIF) intensity and decay time are used to characterize the structure and evolution of soot precursors, while laser-induced incandescence (LII) is utilized to determine the soot volume fraction (SVF) and the effective primary particle diameter (D-p). For the diffusion flames, the addition of 10% DME increases the concentrations of both soot and soot precursors. With the further addition of DME to 20%, the SVF decreases to levels similar to those of E60 and then decreases further with 30% DME addition. All diffusion flames with DME addition exhibit higher concentrations of soot precursors than those of the reference E60 case. For PP12, the addition of 10% DME shows similar concentrations of soot precursors and a slight reduction in the SVF which continues to decrease with further increases in DME additions to the PP12 flame. The addition of DME seems to have little effect on the soot particle diameters for all the studied flames. Overall, the PP flames result in smaller mean particle diameters than the diffusion flame counterparts. (C) 2020 The Combustion Institute. Published by Elsevier Inc. All rights reserved.