ENHANCED HEAT TRANSFER CHARACTERISTICS OF CONJUGATED AIR JET IMPINGEMENT ON A FINNED HEAT SINK

被引：17

作者：

Qiu, Shuxia ^{[1
]}

Xu, Peng ^{[1
]}

Geng, Liping ^{[2
]}

Mujumdar, Arun S. ^{[3
]}

Jiang, Zhouting ^{[1
]}

Yang, Jinghua ^{[1
]}

机构：

[1] China Jiliang Univ, Coll Sci, Hangzhou, Peoples R China

[2] China Jiliang Univ, Coll Metrol & Measurement Engn, Hangzhou, Peoples R China

[3] Western Univ, Dept Chem Engn, London, ON, Canada

来源：

THERMAL SCIENCE | 2017年 / 21卷 / 01期

基金：

中国国家自然科学基金;

关键词：

air jet impingement; finned heat sink; CFD; enhanced heat transfer; IMPINGING JET; FLAT SURFACE; FLOW; CHANNEL; DESIGN; ARRAY; RIBS;

D O I：

10.2298/TSCI141229030Q

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Air jet impingement is one of the effective cooling techniques employed in micro -electronic industry. To enhance the heat transfer performance, a cooling system with air jet impingement on a finned heat sink is evaluated via the computational fluid dynamics method. A 2-D confined slot air impinging jet on a finned flat plate is modeled. The numerical model is validated by comparison of the computed Nusselt number distribution on the impingement target with published experimental results. The flow characteristics and heat transfer performance of jet impingement on both of smooth and finned heat sinks are compared. It is observed that jet impingement over finned target plate improves the cooling performance significantly. A dimensionless heat transfer enhancement factor is introduced to quantify the effect of jet flow Reynolds number on the finned surface. The effect of rectangular fin dimensions on impingement heat transfer rate is discussed in order to optimize the cooling system. Also, the computed flow and thermal fields of the air impingement system are examined to explore the physical mechanisms for heat transfer enhancement.

引用

页码：279 / 288

页数：10

共 27 条

[11] Heat transfer enhancement on a flat surface with axisymmetric detached ribs by normal impingement of circular air jet [J].

Katti, Vadiraj ;

Prabhu, S. V. .

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2008, 29 (05) :1279-1294

[12] Experimental study and theoretical analysis of local heat transfer distribution between smooth flat surface and impinging air jet from a circular straight pipe nozzle [J].

Katti, Vadiraj ;

Prabhu, S. V. .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (17-18) :4480-4495

[13]

Lasance C., 2005, ELECT COOLING, V11, P24

[14]

Lienhard J.H., 1995, Annual Review of Heat Transfer, V6, P199, DOI [DOI 10.1615/ANNUALREVHEATTRANSFER.V6.60, 10.1615/AnnualRevHeatTransfer.v6.60]

[15] Effects of geometric parameters on confined impinging jet heat transfer [J].

Lou, ZQ ;

Mujumdar, AS ;

Yap, C .

APPLIED THERMAL ENGINEERING, 2005, 25 (17-18) :2687-2697

[16] Design of an optimal pin-fin heat sink with air impingement cooling [J].

Maveety, JG ;

Jung, HH .

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2000, 27 (02) :229-240

[17]

Mujumdar Arun S., 2014, Handbook of Industrial Drying, V4th, P1, DOI DOI 10.1080/07373938808916399

[18] A numerical study of turbulent opposed impinging jets issuing from triangular nozzles with different geometries [J].

Parham, Kiyan ;

Esmaeilzadeh, Esmaeil ;

Atikol, Ugur ;

Aldabbagh, L. B. Y. .

HEAT AND MASS TRANSFER, 2011, 47 (04) :427-437

[19] Enhancement of jet-to-wall heat transfer using axisymmetric grooved impinging plates [J].

Sagot, B. ;

Antonini, G. ;

Buron, F. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (06) :1026-1030

[20] Numerical Study of Heat Transfer From Pin-Fin Heat Sink Using Steady and Pulsated Impinging Jets [J].

Sanyal, Anuradha ;

Srinivasan, Kandadai ;

Dutta, Pradip .

IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2009, 32 (04) :859-867

← 1 2 3 →