Preparation of γ-Al2O3 film by high temperature transformation of nanosized γ-AlOOH precursors

被引：26
|
作者：
Mathieu, Yannick [1 ]
Vidal, Loic [1 ]
Valtchev, Valentin [1 ]
Lebeau, Benedicte [1 ]
机构：
[1] Univ Haute Alsace, ENSCMu 3, Equipe Mat Porosite Controlee MPC, IS2M,LRC CNRS 7228, F-68093 Mulhouse, France
来源：
NEW JOURNAL OF CHEMISTRY | 2009年 / 33卷 / 11期
关键词：
FIBROUS BOEHMITE SOL; ALUMINA MEMBRANE; SUSPENSIONS; FABRICATION; MORPHOLOGY; TRANSPORT; COATINGS; SURFACE; RODS;
D O I：
10.1039/b9nj00351g
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Mesoporous boehmite (gamma-AlOOH) and gamma-alumina (gamma-Al2O3) self-supported films were prepared by high temperature transformation of gamma-AlOOH precursor fibers. A polymer, sodium polyacrylate, was used as a size/ morphology controlling agent yielding to a stable colloidal suspension of boehmite ribbon-like fibers after a 168 h hydrothermal treatment at 160 degrees C. The slow evaporation of the solvent leads to gamma-AlOOH film without any cracks and pinholes. The gamma-Al2O3 film, obtained after calcination of the gamma-AlOOH film, exhibit a high thermal stability up to 1000 degrees C and two distinct kinds of mesopores with average diameters of 20-30 angstrom and 50 angstrom. Structural and textural properties of these films confer them interesting properties for filtration processes.
引用
收藏
页码：2255 / 2260
页数：6
相关论文
共 50 条
  • [1] Preparation, characterization and application of high-temperature Al2O3 insulating film
    Niu, Di
    Wang, Qiang
    Zhang, Congchun
    Cheng, Ping
    Wang, Yanlei
    Zhang, Jiubin
    Ding, Guifu
    Xie, Kaisheng
    Shao, Jing
    Liu, Yishen
    Duan, Li
    SURFACE & COATINGS TECHNOLOGY, 2016, 291 : 318 - 324
  • [2] Effect of Precursors on the Preparation and Texture of Mesoporous γ-Al2O3 Powders
    Morozova, L. V.
    Khamova, T. V.
    Polyakova, I. G.
    INORGANIC MATERIALS, 2020, 56 (04) : 353 - 359
  • [3] High temperature transition aluminas in δ-Al2O3/θ-Al2O3 stability range: Review
    Kovarik, Libor
    Bowden, Mark
    Szanyi, Janos
    JOURNAL OF CATALYSIS, 2021, 393 : 357 - 368
  • [4] Facile synthesis of pure phase γ-AlOOH and γ-Al2O3 nanofibers in a recoverable ionic liquid via a low temperature route
    Cai, Yuan
    Huang, Huihui
    Wang, Lei
    Zhang, Xiaojun
    Yuan, Yuewei
    Li, Rui
    Wan, Hui
    Guan, Guofeng
    RSC ADVANCES, 2015, 5 (127) : 104884 - 104890
  • [5] Influence of Al2O3 layer thickness on high-temperature stability of TiAlN/Al2O3 multilayers
    Gao, C. K.
    Yan, J. Y.
    Dong, L.
    Li, D. J.
    APPLIED SURFACE SCIENCE, 2013, 285 : 287 - 292
  • [6] Preparation and characterization of α-Al2O3 film by low temperature thermal oxidation of Al8Cr5 coating
    Zhang, Min
    Xu, Bajin
    Ling, Guoping
    APPLIED SURFACE SCIENCE, 2015, 331 : 1 - 7
  • [7] Al2O3 and Sn/Al2O3 nanowires: fabrication and characterisation
    Shaban, Mohamed
    Ali, Mona
    Abdel-Hady, Kamal
    Hamdy, Hany
    MICRO & NANO LETTERS, 2015, 10 (07) : 324 - 329
  • [8] Preparation of alumina ceramic by κ-Al2O3
    Hao, Zijing
    Wu, Bolin
    Wu, Tingting
    CERAMICS INTERNATIONAL, 2018, 44 (07) : 7963 - 7966
  • [9] Effect of Al2O3 thickness and oxidant precursors on the interface composition and contamination in Al2O3/GaN structures
    Spelta, Tarek
    Martinez, Eugenie
    Veillerot, Marc
    Rocha, Pedro Fernandes Paes Pinto
    Vauche, Laura
    Salem, Bassem
    Hyot, Berangere
    SURFACE AND INTERFACE ANALYSIS, 2024, 56 (07) : 399 - 407
  • [10] High-Temperature Oxidation of Nickel-Based Cermet Coatings Containing WC and Al2O3 Nanosized Particles
    Farrokhzad, M. A.
    Khan, T. I.
    OXIDATION OF METALS, 2016, 86 (5-6): : 431 - 451
12345