The influence of axial loading on the interface stresses of thermal barrier coatings

被引：18
|
作者：
Baeker, M. [1 ]
Roesler, J. [1 ]
Affeldt, E. [2 ]
机构：
[1] Tech Univ Carolo Wilhelmina Braunschweig, D-38106 Braunschweig, Germany
[2] MTU Aero Engines, D-80995 Munich, Germany
来源：
COMPUTATIONAL MATERIALS SCIENCE | 2009年 / 47卷 / 02期
关键词：
Thermal barrier coating; Finite element modeling; Thermo-mechanical fatigue; Failure mechanism; DELAMINATION; MECHANISMS;
D O I：
10.1016/j.commatsci.2009.09.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, a thermal barrier coating system is studied numerically using finite elements. If the system is isothermally compressed, large stresses at the coating interface may develop due to the differences in Young's modulus. Since the coefficient of thermal expansion of the substrate differs from those of the coating materials, axial loading of the coating system is also relevant upon cooling. By artificially changing the coefficient of thermal expansion of the coating materials, the effect of axial loading and of stresses due to thermal differential strains in radial direction can be evaluated. Consequences for mechanical loading are discussed, showing that out-of-phase loading of a TBC system unloads critical regions of the TBC on the microscale. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：466 / 470
页数：5
相关论文
共 50 条
  • [31] Analytical modeling of oxide thickness effects on residual stresses in thermal barrier coatings
    Hsueh, CH
    Fuller, ER
    SCRIPTA MATERIALIA, 2000, 42 (08) : 781 - 787
  • [32] Buckling and interface strength analyses of thermal barrier coatings combining Laser Shock Adhesion Test to thermal cycling
    Guipont, Vincent
    Begue, Geoffrey
    Fabre, Gregory
    Maurel, Vincent
    SURFACE & COATINGS TECHNOLOGY, 2019, 378
  • [33] Inspection of interface debonding in thermal barrier coatings using pulsed thermography
    Dong L.
    Guo W.
    Wang H.
    Xing Z.
    Feng F.
    Wang B.
    Gao Z.
    Hangkong Xuebao/Acta Aeronautica et Astronautica Sinica, 2019, 40 (08):
  • [34] Development of YSZ Thermal Barrier Coatings Using Axial Suspension Plasma Spraying
    Zhou, Dapeng
    Guillon, Olivier
    Vassen, Robert
    COATINGS, 2017, 7 (08):
  • [35] Improved the Durability of Thermal Barrier Coatings with Interface Modified by Three-Dimensional Mesh Patterns
    Luo, L.
    Zhang, X.
    Zou, Z.
    Guo, F.
    Qi, H.
    Zhao, X.
    Xiao, P.
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (10) : 3406 - 3410
  • [36] The relation between the interface undulation and oxide film visco-elasticity in thermal barrier coatings
    Cen, L.
    Qin, W. Y.
    Yu, Q. M.
    CERAMICS INTERNATIONAL, 2021, 47 (15) : 21705 - 21713
  • [37] Effect of TGO thickness on the thermal barrier coatings life under thermal shock and thermal cycle loading
    Torkashvand, Kaveh
    Poursaeidi, Esmaeil
    Mohammadi, Maryam
    CERAMICS INTERNATIONAL, 2018, 44 (08) : 9283 - 9293
  • [38] Interface failure analysis of thermal barrier coatings under CMAS penetration
    Zhang Z.
    Han Y.
    Wang W.
    Cai Z.
    Hangkong Dongli Xuebao/Journal of Aerospace Power, 2021, 36 (08): : 1702 - 1711
  • [39] Finite Element Simulations of Turbine Blades with Thermal Barrier Coatings Subjected to Cyclic Thermal Loading
    Liu, Q. X.
    Mao, W. G.
    Yang, L.
    Zhou, Y. C.
    PROCEEDINGS OF THE THIRD INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING AND MECHANICS, VOLS 1 AND 2, 2009, : 904 - 909
  • [40] Influence of thermal sensitivity of the materials on temperature and thermal stresses of the brake disc with thermal barrier coating
    Yevtushenko, Aleksander
    Kuciej, Michal
    Och, Ewa
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2017, 87 : 288 - 294
12345