The influence of axial loading on the interface stresses of thermal barrier coatings

被引：18
作者：
Baeker, M. [1 ]
Roesler, J. [1 ]
Affeldt, E. [2 ]
机构：
[1] Tech Univ Carolo Wilhelmina Braunschweig, D-38106 Braunschweig, Germany
[2] MTU Aero Engines, D-80995 Munich, Germany
来源：
COMPUTATIONAL MATERIALS SCIENCE | 2009年 / 47卷 / 02期
关键词：
Thermal barrier coating; Finite element modeling; Thermo-mechanical fatigue; Failure mechanism; DELAMINATION; MECHANISMS;
D O I：
10.1016/j.commatsci.2009.09.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, a thermal barrier coating system is studied numerically using finite elements. If the system is isothermally compressed, large stresses at the coating interface may develop due to the differences in Young's modulus. Since the coefficient of thermal expansion of the substrate differs from those of the coating materials, axial loading of the coating system is also relevant upon cooling. By artificially changing the coefficient of thermal expansion of the coating materials, the effect of axial loading and of stresses due to thermal differential strains in radial direction can be evaluated. Consequences for mechanical loading are discussed, showing that out-of-phase loading of a TBC system unloads critical regions of the TBC on the microscale. (C) 2009 Elsevier B.V. All rights reserved.
引用
收藏
页码：466 / 470
页数：5
相关论文
共 13 条
[1]   A parametric study of the stress state of thermal barrier coatings Part II:: cooling stresses [J].
Bäker, M ;
Rösler, J ;
Heinze, G .
ACTA MATERIALIA, 2005, 53 (02) :469-476
[2]   Phase-angle effects on damage mechanisms of thermal barrier coatings under thermomechanical fatigue [J].
Baufeld, B ;
Tzimas, E ;
Hähner, P ;
Müllejans, H ;
Peteves, SD ;
Moretto, P .
SCRIPTA MATERIALIA, 2001, 45 (07) :859-865
[3]   BEHAVIOR OF THERMAL BARRIER COATINGS FOR ADVANCED GAS-TURBINE BLADES [J].
CHANG, GC ;
PHUCHAROEN, W ;
MILLER, RA .
SURFACE & COATINGS TECHNOLOGY, 1987, 30 (01) :13-28
[4]   On the propagation and coalescence of delamination cracks in compressed coatings: with application to thermal barrier systems [J].
Chen, X ;
Hutchinson, JW ;
He, MY ;
Evans, AG .
ACTA MATERIALIA, 2003, 51 (07) :2017-2030
[5]   Effect of interface undulations on the thermal fatigue of thin films and scales on metal substrates [J].
Evans, AG ;
He, MY ;
Hutchinson, JW .
ACTA MATERIALIA, 1997, 45 (09) :3543-3554
[6]   Modeling oxidation induced stresses in thermal barrier coatings [J].
Freborg, AM ;
Ferguson, BL ;
Brindley, WJ ;
Petrus, GJ .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 245 (02) :182-190
[7]   Simulation of stresses and delamination in a plasma-sprayed thermal barrier system upon thermal cycling [J].
He, MY ;
Hutchinson, JW ;
Evans, AG .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 345 (1-2) :172-178
[8]   Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings [J].
Rabiei, A ;
Evans, AG .
ACTA MATERIALIA, 2000, 48 (15) :3963-3976
[9]   Mechanical integrity of thermal barrier coated material systems [J].
Rösler, J .
ADVANCED ENGINEERING MATERIALS, 2005, 7 (1-2) :50-54
[10]   A parametric study of the stress state of thermal barrier coatings -: Part I:: creep relaxation [J].
Rösler, J ;
Bäker, M ;
Aufzug, K .
ACTA MATERIALIA, 2004, 52 (16) :4809-4817
12