Linear stability analysis for a hydrodynamic journal bearing considering cavitation effects

被引:28
作者
Rao, TVVLN [1 ]
Sawicki, JT
机构
[1] Birla Inst Technol & Sci, Mech Grp, Pilani 333031, Rajasthan, India
[2] Cleveland State Univ, Fenn Coll Engn, Rotor Bearing Dynam & Diagnost Lab, Cleveland, OH 44115 USA
关键词
hydrodynamic journal bearing; cavitation; stability; dynamic coefficients;
D O I
10.1080/10402000208982573
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The purpose of this paper is to present the two-dimensional linear stability analysis considering the fluid from, in both full film and cavitation regions for a plain cylindrical journal bearing. The Lund's infinitesimal perturbation procedure is applied to Elrod's universal equation for evaluation of unsteady pressure gradients. Based on JFO theory, the pressure distributions, film rupture, and reformation boundaries tan be obtained using Elrod's universal equation, for a given operating position of the journal. In this work, it is assumed that for infinitesimal perturbation of a journal about the equilibrium position, the film rapture and film reformation boundaries are the same as those obtained for steady state. However, the unsteady pressure gradients in the full film region are evaluated taking into consideration the perturbed flow parameters in the cavitation region, i.e., at both rupture and reformation boundaries. The linearized stiffness and damping coefficients, whirl frequency ratio. and threshold speed for various values of eccentricity and L/D ratios are obtained for a plain cylindrical journal bearing with an axial groove along the load line. Measured data of dynamic coefficients for a 120degrees partial are bearing are chosen for comparison with this work. Results show good agreement between the theoretical and experimental results.
引用
收藏
页码:450 / 456
页数:7
相关论文
共 11 条
[1]  
BREWE DE, 1986, ASME, V108, P628, DOI DOI 10.1115/1.3261288]
[2]  
ELROD HG, 1994, J TRIBOL-T ASME, V116, P330, DOI 10.1115/1.2927223
[3]   A CAVITATION ALGORITHM [J].
ELROD, HG .
JOURNAL OF LUBRICATION TECHNOLOGY-TRANSACTIONS OF THE ASME, 1981, 103 (03) :350-354
[4]  
ELROD HG, 1995, ASME, V117, P365
[5]   Calculation and measurement of the stiffness and damping coefficients for a low impedance hydrodynamic bearing [J].
Goodwin, MJ ;
Ogrodnik, PJ ;
Roach, MP ;
Fang, Y .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1997, 119 (01) :57-63
[6]  
Lund J. W., 1978, TOPICS FLUID FILM BE, P1
[7]  
LUND JW, 1987, ASME, V109, P38
[8]   Survey of experimental data for fixed geometry hydrodynamic journal bearings [J].
Swanson, EE ;
Kirk, RG .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1997, 119 (04) :704-710
[9]  
SZERI AZ, 1998, FLUID FILM LUBRICATI, P81
[10]   DEVELOPMENT AND EVALUATION OF A CAVITATION ALGORITHM [J].
VIJAYARAGHAVAN, D ;
KEITH, TG .
TRIBOLOGY TRANSACTIONS, 1989, 32 (02) :225-233