Effect of Modification of Mono-crystalline Corundum Grinding Wheel on Cutting Forces in Grinding of Aluminum Alloy 7075

被引：0
|
作者：
Habrat, Witold [1 ]
Skora, Wojciech [1 ]
Krolczyk, Jolanta B. [2 ]
Legutko, Stanislaw [3 ]
机构：
[1] Rzeszow Univ Technol, Fac Mech Engn & Aeronaut, Rzeszow, Poland
[2] Opole Univ Technol, Fac Mech Engn, Opole, Poland
[3] Poznan Univ Tech, Fac Mech Engn & Management, Poznan, Poland
来源：
ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING | 2019年
关键词：
Grinding; Grinding force; Surface roughness; RSM; Surface quality; WEAR; VIBRATIONS; ROUGHNESS; PRESSURE;
D O I：
10.1007/978-3-030-16943-5_25
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents an analysis of the process of grinding of aluminum alloy 7075. A monocrystalline corundum grinding wheel with a modified spatial structure was used for the tests in the direction of even "opening" of the grinding wheel during the grinding process. The components of the grinding force measured using the 3-component Kistler 9121 dynamometer and force models for variable grinding parameters were developed using the RSM methodology. The performed tests show the possibility of elaborating models of the components of the cutting force in surface grinding. The empirical models of the cutting force components for a modified grinding wheel were developed. The test results were compared with a conventional wheel with the same hardness, grain size, and structure.
引用
收藏
页码：276 / 286
页数：11
相关论文
共 20 条
  • [1] Cutting forces in end grinding by a wheel
    Khrokin A.N.
    Svirshchev V.I.
    Russ. Eng. Res., 2008, 6 (617-618): : 617 - 618
  • [2] Experimental Study on Forces and Surface Roughness in Peripheral Grinding of an Aluminum Alloy
    Atzeni, Eleonora
    Calignano, Flaviana
    Salmi, Alessandro
    Bassoli, Elena
    SAE INTERNATIONAL JOURNAL OF MATERIALS AND MANUFACTURING, 2019, 12 (03) : 229 - 241
  • [3] The effect of sulfurization on the grinding wheel cutting ability in the internal cylindrical grinding of nickel superalloys
    Nadolny, Krzysztof
    Sienicki, Walery
    Wojtewicz, Michal
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (01) : 140 - 154
  • [4] A new model of grit cutting depth in wafer rotational grinding considering the effect of the grinding wheel, workpiece characteristics, and grinding parameters
    Zhang, Yu
    Kang, Renke
    Gao, Shang
    Huang, Jinxing
    Zhu, Xianglong
    PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY, 2021, 72 : 461 - 468
  • [5] Effect of characteristics of the grinding wheel on cemented carbide cutting tool sharpening
    Zhang, CY
    Wang, GC
    Pei, HJ
    ADVANCES IN GRINDING AND ABRASIVE PROCESSES, 2004, 259-2 : 50 - 54
  • [6] Effect of vitrified bond microstructure and volume fraction in the grinding wheel on traverse internal cylindrical grinding of Inconel® alloy 600
    Nadolny, Krzysztof
    Herman, Daniela
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 81 (5-8) : 905 - 915
  • [7] Surface Grinding of Ti-6Al-4V Alloy with SiC Abrasive Wheel at Various Cutting Conditions
    de Mello, Antonio Vitor
    de Silva, Rosemar Batista
    Machado, Alisson Rocha
    Gelamo, Rogerio Valentim
    Diniz, Anselmo Eduardo
    Moreira de Oliveira, Rodolfo Fischer
    45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45), 2017, 10 : 590 - 600
  • [8] The effect of the grinding wheel modification on the state of the workpiece surface layer after internal cylindrical grinding of steel C45
    Wojcik, Ryszard
    Nadolny, Krzysztof
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2017, 231 (06) : 1162 - 1173
  • [9] Method for fault detection of aluminum oxide grinding wheel cutting surfaces using a piezoelectric diaphragm and digital signal processing techniques
    Lopes, Wenderson Nascimento
    Aguiar, Paulo Roberto
    Lofrano Dotto, Fabio Romano
    Conceicao Junior, Pedro Oliveira
    Aulestia Viera, Martin Antonio
    Fernandez, Breno Ortega
    Bianchi, Eduardo Carlos
    MEASUREMENT, 2021, 180
  • [10] ANFIS prediction modeling of surface roughness and cutting force of titanium alloy ground with carbon nanotube grinding wheel
    Stephen, Deborah Serenade
    Sethuramalingam, Prabhu
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2024, 7 (04) : 3285 - 3300
12