Research on Noninteger Pole Number for Segmental Permanent Magnet Linear Synchronous Motor

被引:21
作者
Tan, Qiang [1 ]
Wang, Mingyi [1 ]
Li, Liyi [1 ]
Li, Junchi [1 ]
机构
[1] Harbin Inst Technol, Dept Elect Engn, Harbin 150001, Peoples R China
关键词
Force; Permanent magnet motors; Forging; Harmonic analysis; Synchronous motors; Permanent magnets; Windings; Detent force; linear motor; non-integer pole number; permanent magnet motor; segmental; thrust; DETENT FORCE; COGGING FORCE; REDUCTION; DESIGN;
D O I
10.1109/TIE.2020.2985001
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
A segmental permanent magnet linear synchronous motor (S-PMLSM) with noninteger pole number, which has low detent force and high thrust, is presented in this article. For the S-PMLSM, the noninteger pole structure makes up for the defect that the conventional integer pole structure cannot suppress the third and its times harmonics in the detent force, thereby further reducing the thrust ripple rate of the motor. Special winding arrangement is adopted for noninteger pole structure, of which the winding factor is relatively high. Another advantage of the noninteger pole structure is the decoupling between the detent force and the cogging force. When designing cogging parameters and structures, it is not limited by the requirement of the detent force, which enlarges the range of cogging parameters and finally helps to improve the motor thrust. In this article, 18-slot 24-pole and 18-slot 19.2-pole S-PMLSMs, representing integer and noninteger pole structures, respectively, are selected as samples for comparative analysis. The results show that the later removes almost all detent force while giving higher thrust than the former. The simulation and experimental results validate the research theory.
引用
收藏
页码:4120 / 4130
页数:11
相关论文
共 24 条
[1]  
Bai YR, 2014, INT C ELECTR MACH SY, P1743, DOI 10.1109/ICEMS.2014.7013776
[2]   Influence of Leading Design Parameters on the Force Performance of a Complementary and Modular Linear Flux-Switching Permanent-Magnet Motor [J].
Cao, Ruiwu ;
Cheng, Ming ;
Mi, Chunting Chris ;
Hua, Wei .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (05) :2165-2175
[3]   Double-Sided Iron-Core PMLSM Mover Teeth Arrangement Design for Reduction of Detent Force and Speed Ripple [J].
Chung, Shi-Uk ;
Kim, Jong-Moo .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2016, 63 (05) :3000-3008
[4]   Force Ripple and Magnetic Unbalance Reduction Design for Doubly Salient Permanent Magnet Linear Synchronous Motor [J].
Chung, Shi-Uk ;
Kim, Ji-Won ;
Woo, Byung-Chul ;
Hong, Do-Kwan ;
Lee, Ji-Young ;
Koo, Dae-Hyun .
IEEE TRANSACTIONS ON MAGNETICS, 2011, 47 (10) :4207-4210
[5]   A Feasibility Study on a New Doubly Salient Permanent Magnet Linear Synchronous Machine [J].
Chung, Shi-Uk ;
Lee, Hong-Joo ;
Woo, Byung-Chul ;
Kim, Ji-Won ;
Lee, Ji-Young ;
Moon, Seung-Ryul ;
Hwang, Sang-Moon .
IEEE TRANSACTIONS ON MAGNETICS, 2010, 46 (06) :1572-1575
[6]  
Gao Y., 2017, 2017 IEEE International Magnetics Conference (INTERMAG), DOI 10.1109/INTMAG.2017.8007828
[7]   Analysis and Minimization of Detent End Force in Linear Permanent Magnet Synchronous Machines [J].
Hu, Hengzai ;
Liu, Xiangdong ;
Zhao, Jing ;
Guo, Youguang .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2018, 65 (03) :2475-2486
[8]  
Huang LR, 2014, INT C ELECTR MACH SY, P1791, DOI 10.1109/ICEMS.2014.7013772
[9]   Electromagnetic and Thrust Characteristics of Double-sided Permanent Magnet Linear Synchronous Motor Adopting Staggering Primaries Structure [J].
Huang, Xu Zhen ;
Li, Jing ;
Zhang, Chengming ;
Qian, Zhen Yu ;
Li, Liyi ;
Gerada, David .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2019, 66 (06) :4826-4836