Predictive torque control of induction machine with an adaptive observer for trajectory planning of servo press

被引：0

作者：

Li, Qi ^{[1
]}

Gao, Jianbo ^{[2
]}

Wang, Qiwu ^{[2
]}

Kennel, Ralph ^{[1
]}

机构：

[1] Tech Univ Munich, Acisstr 21, Munich, Germany

[2] Qilu Univ Technolgy, Laser Inst, Shandong Acad Sci, A3 Block,9 Haichuan Rd, Jining, Peoples R China

来源：

2020 22ND EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS (EPE'20 ECCE EUROPE) | 2020年

关键词：

Model-based predictive control; Induction machine; Sensorless control; Servo-drive;

D O I：

10.23919/epe20ecceeurope43536.2020.9215653

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

In order to improve the accuracy of trajectory planning, servo-drive of induction machine was employed in press. The crank mechanism is widely used as the critical transmission of the press. Dynamic model of press was established through Lagrange Equation and computed torque control method was chosen to solve the nonlinearity problem. To delivering better dynamic performance and reduce the cost of encoder, a predictive torque control of induction machine with an adaptive observer is also proposed in this scheme. The simulation shows the new algorithm can help servo-drive track the trajectory of crank and the performance of new strategy is better than traditional method. It can extent the new possible solution of trajectory for nonlinearity.

引用

页数：8

共 10 条

[1]

[Anonymous], 2011, PROC IEEE AFRICON 11

[2]

[Anonymous], 2014, INT J ELECT ENERGY, DOI DOI 10.1016/J.CSITE.2014.01.002

[3] Predictive Control in Power Electronics and Drives [J].

Cortes, Patricio ;

Kazmierkowski, Marian P. ;

Kennel, Ralph M. ;

Quevedo, Daniel E. ;

Rodriguez, Jose .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2008, 55 (12) :4312-4324

[4] Servo Press Drive using Model Predictive Control of Motor Current [J].

Gao, Jianbo ;

Li, Qi ;

Wang, Qiwu ;

Jiang, Wenxue ;

Kennel, Ralph .

2019 IEEE INTERNATIONAL SYMPOSIUM ON PREDICTIVE CONTROL OF ELECTRICAL DRIVES AND POWER ELECTRONICS (PRECEDE 2019), 2019, :401-406

[5]

Huo ZL, 2012, CHIN CONT DECIS CONF, P4068, DOI 10.1109/CCDC.2012.6244649

[6] Slider-crank mechanism control using adaptive computed torque technique [J].

Lin, FJ ;

Lin, YS ;

Chiu, SL .

IEE PROCEEDINGS-CONTROL THEORY AND APPLICATIONS, 1998, 145 (03) :364-376

[7]

Liu C, 2016, 2016 IEEE/CSAA INTERNATIONAL CONFERENCE ON AIRCRAFT UTILITY SYSTEMS (AUS), P346, DOI 10.1109/AUS.2016.7748072

[8] State of the Art of Finite Control Set Model Predictive Control in Power Electronics [J].

Rodriguez, Jose ;

Kazmierkowski, Marian P. ;

Espinoza, Jose R. ;

Zanchetta, Pericle ;

Abu-Rub, Haitham ;

Young, Hector A. ;

Rojas, Christian A. .

IEEE TRANSACTIONS ON INDUSTRIAL INFORMATICS, 2013, 9 (02) :1003-1016

[9] Finite Control Set Model Predictive Torque Control of Induction Machine With a Robust Adaptive Observer [J].

Wang, Fengxiang ;

Davari, S. Alireza ;

Chen, Zhe ;

Zhang, Zhenbin ;

Khaburi, Davood Arab ;

Rodriguez, Jose ;

Kennel, Ralph .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2017, 64 (04) :2631-2641

[10] Low noise control of servo press [J].

Wang, Xingsong ;

Ma, Qing ;

Zhu, Zhidan .

IECON 2007: 33RD ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY, VOLS 1-3, CONFERENCE PROCEEDINGS, 2007, :833-+

← 1 →