The effect of Ca addition on microstructure and mechanical properties of extruded AZ31 alloys

被引：11

作者：

Song, Leipeng ^{[1
]}

Lu, Yalin ^{[1
,2
]}

Zhang, Yang ^{[1
]}

Li, Xingcheng ^{[2
]}

Cong, Mengqi ^{[2
]}

Xu, Wenting ^{[1
]}

机构：

[1] Jiangsu Univ Technol, Sch Mat Engn, Changzhou 213001, Peoples R China

[2] Key Lab Adv Mat Design & Addit Mfg Jiangsu Prov, Changzhou 213001, Peoples R China

来源：

VACUUM | 2019年 / 168卷

基金：

中国国家自然科学基金;

关键词：

AZ31; alloys; Ca addition; Microstructure; Strengthening; SN-ZN ALLOY; TEXTURE EVOLUTION; MAGNESIUM ALLOY; GRAIN-SIZE; IMPROVEMENT; RECRYSTALLIZATION; DEFORMATION; ASYMMETRY; CALCIUM;

D O I：

10.1016/j.vacuum.2019.108822

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Evolution of microstructure and tensile properties of extruded AZ31 alloys through Ca addition have been systematically investigated in this paper. Results show that Al-Mn and Al2Ca phases scattered along extruding direction exist in extruded AZ31-xCa (0.5 and 1 wt%Ca) alloys. AZ31-1 wt%Ca alloys exhibit finer microstructure with mean grain size of similar to 2.79 mu m in comparison with AZ31-0.5 wt%Ca alloys, which is mainly related to the dynamic recrystallization (DRX) and the inhibition of grain coarsening by Al2Ca phase. In addition, the increased Ca content weakens the {0001} basal texture of extruded AZ31 alloys owing to the formation of Al2Ca phase. The comprehensive mechanical properties of extruded AZ31 alloys have an obvious improvement by adding Ca element owing to the grain refinement strengthening, second phase strengthening and texture strengthening.

引用

页数：6

共 35 条

[1] Triggering rare earth texture modification in magnesium alloys by addition of zinc and zirconium
Basu, I.
Al-Samman, T.
[J]. ACTA MATERIALIA, 2014, 67 : 116 - 133
[2] Improvement of mechanical properties and reduction of yield asymmetry of extruded Mg-Sn-Zn alloy through Ca addition
Chai, Yanfu
Jiang, Bin
Song, Jiangfeng
Wang, Qinghang
Gao, Hang
Liu, Bo
Huang, Guangsheng
Zhang, Dingfei
Pan, Fusheng
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 782 : 1076 - 1086
[3] Effects of Zn and Ca addition on microstructure and mechanical properties of as-extruded Mg-1.0Sn alloy sheet
Chai, Yanfu
Jiang, Bin
Song, Jiangfeng
Liu, Bo
Huang, Guangsheng
Zhang, Dingfei
Pan, Fusheng
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 746 (82-93): : 82 - 93
[4] Effect of Ca addition on the room-temperature formability of AZ31 magnesium alloy
Chaudry, U. M.
Kim, Y. S.
Hamad, K.
[J]. MATERIALS LETTERS, 2019, 238 : 305 - 308
[5] Effects of calcium on the activity of slip systems in AZ31 magnesium alloy
Chaudry, Urner Masood
Kim, Tae Hoo
Park, Sang Duck
Kim, Ye Sik
Hamad, Kotiba
Kim, Jung-Gu
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 739 : 289 - 294
[6] Dynamic precipitation in Mg-3Al-1Zn alloy during different plastic deformation modes
Dogan, E.
Wang, S.
Vaughan, M. W.
Karaman, I.
[J]. ACTA MATERIALIA, 2016, 116 : 1 - 13
[7] Comparison of microstructure and mechanical properties of Mg-Zn microalloyed with Ca or Ce
Du, Yuzhou
Zheng, Mingyi
Jiang, Bailing
[J]. VACUUM, 2018, 151 : 221 - 225
[8] Effect of Zn addition on the microstructure and mechanical properties of cast, rolled and extruded Mg-6Sn-xZn alloys
El Mahallawy, N.
Diaa, A. Ahmed
Akdesir, M.
Palkowski, H.
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 680 : 47 - 53
[9] Effect of Zn interlayer thickness on the microstructure and mechanical properties of two-step diffusion bonded joint of ZK60Mg and 5083Al
Guo, Yangyang
Quan, Gaofeng
Ren, Lingbao
Liu, Baoshuan
Al-Ezzi, Salih
Pan, Houhong
[J]. VACUUM, 2019, 161 : 353 - 360
[10] Transmission electron microscopy and thermodynamic studies of CaO-added AZ31 Mg alloys
Jeong, Jiwon
Im, Jiseong
Song, Kyung
Kwon, Minhyeok
Kim, Shae Kwang
Kang, Youn-Bae
Oh, Sang Ho
[J]. ACTA MATERIALIA, 2013, 61 (09) : 3267 - 3277

← 1 2 3 4 →