Failure analysis of irreversible changes in the construction of car tyres

被引：6
作者：
Fedorko, Gabriel [1 ]
Molnar, Vieroslav [2 ]
Dovica, Miroslav [3 ]
Toth, Teodo [3 ]
Soos, Lubomir [4 ]
Fabianova, Jana [1 ]
Pinosova, Miriama [2 ]
机构：
[1] Tech Univ Kosice, Pk Komenskeho 14, Kosice 04200, Slovakia
[2] Tech Univ Kosice Seat Presov, Fac Mfg Technol, Bayerova 1, Presov 08001, Slovakia
[3] Tech Univ Kosice, Fac Mech Engn, Letna 9, Kosice 04200, Slovakia
[4] Univ Technol Bratislava, Fac Mech Engn, Namestie Slobody 17, Bratislava 81231 1, Slovakia
来源：
ENGINEERING FAILURE ANALYSIS | 2019年 / 104卷
关键词：
Car tyre; Damage; Metrotomography; Sharp-edged material; Analysis; DIGITAL SHEAROGRAPHY; TYRE; RUBBER; COMPUTER;
D O I：
10.1016/j.engfailanal.2019.05.035
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Failure analysis construction of car tyres is a highly demanding process requiring very specific methods of analysis. Industrial metrotomography is one of suitable analytical tool in this area. However, the method used for failure analysis construction of car tyres may have its limits. The paper provides a detailed research for the analysis of 5 typical types of damage occurring in car tyres, analysing the possibilities of such a technology as well as occurrence of undesirable phenomena. Results provided further on refer to occurrence of undesirable phenomenon such as various artifacts due to their construction, but also confirm suitability of application of the method for car tyres research of failure analysis.
引用
收藏
页码：399 / 408
页数：10
相关论文
共 39 条
  • [1] TIREDDX: an integrated intelligent defects diagnostic system for tire production and service
    Abou-Ali, MG
    Khamis, M
    [J]. EXPERT SYSTEMS WITH APPLICATIONS, 2003, 24 (03) : 247 - 259
  • [2] Numerical and experimental testing of vehicle tyre under impulse loading conditions
    Baranowski, Pawel
    Malachowski, Jerzy
    Mazurkiewicz, Lukasz
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2016, 106 : 346 - 356
  • [3] Heterogeneous strain and bonded granular structure change in triaxial specimen studied by computer, tomography
    Chang, CS
    Matsushima, T
    Lee, X
    [J]. JOURNAL OF ENGINEERING MECHANICS-ASCE, 2003, 129 (11): : 1295 - 1307
  • [4] Design and testing of an innovative measurement device for tyre-road contact forces
    Cheli, F.
    Braghin, F.
    Brusarosco, M.
    Mancosu, F.
    Sabbioni, E.
    [J]. MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2011, 25 (06) : 1956 - 1972
  • [5] Application of objective vehicle dynamics methods in the tire development process
    Cramer, Christian
    Wies, Burkhard
    [J]. 8TH INTERNATIONAL MUNICH CHASSIS SYMPOSIUM 2017: CHASSIS.TECH PLUS, 2017, : 735 - 754
  • [6] A new technique to detect defect size and depth in composite structures using digital shearography and unconstrained optimization
    De Angelis, G.
    Meo, M.
    Almond, D. P.
    Pickering, S. G.
    Angioni, S. L.
    [J]. NDT & E INTERNATIONAL, 2012, 45 (01) : 91 - 96
  • [7] Dynamic behaviour of a rolling tyre: Experimental and numerical analyses
    Diaz, Cristobal Gonzalez
    Kindt, Peter
    Middelberg, Jason
    Vercammen, Stijn
    Thiry, Christophe
    Close, Roland
    Leyssens, Jan
    [J]. JOURNAL OF SOUND AND VIBRATION, 2016, 364 : 147 - 164
  • [8] Numerical evaluation of tyre/road contact pressures using a multi-asperity approach
    Dubois, G.
    Cesbron, J.
    Yin, H. P.
    Anfosso-Ledee, F.
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2012, 54 (01) : 84 - 94
  • [9] Interfacial microanalysis of rubber-tyre-cord adhesion and the influence of cobalt
    Fulton, WS
    Smith, GC
    Titchener, KJ
    [J]. APPLIED SURFACE SCIENCE, 2004, 221 (1-4) : 69 - 86
  • [10] Detection of delamination in tyres using eddy currents
    Gros, XE
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 1997, 211 (01) : 79 - 82
1234