Properties and Rapid Sintering of a Nanostructured Cr2Zr-1.5ZrO2 Composite by High Frequency Induction Heating

被引：0

作者：

Shon, In-Jin ^{[1
,2
]}

机构：

[1] Chonbuk Natl Univ, Div Adv Mat Engn, Engn Coll, Jeonju 561756, South Korea

[2] Chonbuk Natl Univ, Res Ctr Adv Mat Dev, Engn Coll, Jeonju 561756, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2017年 / 17卷 / 06期

基金：

新加坡国家研究基金会;

关键词：

Sintering; Composite; Nanostructure; Mechanical Properties; Synthesis; MECHANICAL-PROPERTIES; CONSOLIDATION; FABRICATION; CERAMICS;

D O I：

10.1166/jnn.2017.13419

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Dense nanostructured Cr2Zr-1.5ZrO(2) composite was sintered by high frequency induction heating within one min from mechanically milled powders. The advantage of this process is that it allows very quick densification to near-theoretical density and prohibition of grain growth in nanostructured materials. Highly dense Cr2Zr-1.5ZrO(2) composite with a relative density of up to 99.6% was produced under application of an 80 MPa pressure with the induced current. The mechanical properties and microstructure of the nanostructured Cr2Zr-1.5ZrO(2) was investigated from the viewpoints of using Vickers hardness measurement, X-ray diffraction analysis and FE-SEM observation.

引用

页码：4103 / 4107

页数：5

共 28 条

[1]

Bal B., 2006, Seminars in Arthroplasty, V17, P94, DOI DOI 10.1053/J.SART.2006.09.002

[2] DIFFUSION MODELS FOR HOT PRESSING WITH SURFACE ENERGY AND PRESSURE EFFECTS AS DRIVING FORCES [J].