EFFECT OF INITIAL MICROSTRUCTURE ON HOT FORGING OF MG ALLOYS

被引：0

作者：

Kwon, Y. ^{[1
]}

Lee, Y. ^{[1
]}

Kim, S. ^{[1
]}

Lee, J. ^{[1
]}

机构：

[1] KIMS, Dept Mat Proc, Chang Won 641831, South Korea

来源：

ENGINEERING PLASTICITY AND ITS APPLICATIONS: FROM NANOSCALE TO MACROSCALE | 2009年

关键词：

Mg alloy; Forging; Texture; MAGNESIUM ALLOYS; TEMPERATURE;

D O I：

10.1142/9789814261579_0107

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Magnesium alloys still have a lot of technical challenges to be solved for more applications. There have been many research activities to enhance formability of magnesium alloys. One is to design new alloy composition having better formability. Also, low formability of wrought alloys can be improved by optimizing the processing variables. In the present study, effect of process variables such as forging temperature and forging speed were investigated to forgeability of three different magnesium alloys such as AZ31, AZ61 and ZK60. To understand the effect of process variables more specifically, both numerical and experimental works have been carried out on the model which contains both upsetting and extrusion geometries. Forgeability of magnesium alloys was found to depend more on the forging speed rather than temperature. Forged sample showed a significant activity of twinning, which was found to be closely related with flow uniformity.

引用

页码：692 / 697

页数：6

共 3 条

[1] Effect of materials and temperature on the forward extrusion of magnesium alloys
Chandrasekaran, M
John, YMS
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 381 (1-2): : 308 - 319
[2] Flow softening behavior during high temperature deformation of AZ31Mg alloy
Lee, Byoung Ho
Reddy, N. S.
Yeom, Jong Taek
Lee, Chong Soo
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 766 - 769
[3] Forgeability of Mg-Al-Zn magnesium alloys in hot and warm closed die forging
Skubisz, P.
Sinczak, J.
Bednarek, S.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2006, 177 (1-3) : 210 - 213

← 1 →