Ammonia reactor;
Urea reactor;
Process control;
Chemical industry;
Adaptive model predictive controller;
Adaptive Neural Network Model Predictive Control;
Adaptive neuro-fuzzy sliding mode controller;
Nonlinearity;
INFERENCE SYSTEM;
REACTOR;
SIMULATION;
NETWORK;
D O I:
10.1016/j.cjche.2016.07.021
中图分类号:
TQ [化学工业];
学科分类号:
0817 ;
摘要:
This paper introduces the mathematical model of ammonia and urea reactors and suggested three methods for designing a special purpose controller. The first proposed method is Adaptive model predictive controller, the second is Adaptive Neural Network Model Predictive Control, and the third is Adaptive neuro-fuzzy sliding mode controller. These methods are applied to a multivariable nonlinear system as an ammonia-urea reactor system. The main target of these controllers is to achieve stabilization of the outlet concentration of ammonia and urea, a stable reaction rate, an increase in the conversion of carbon monoxide (CO) into carbon dioxide (CO2) to reduce the pollution effect, and an increase in the ammonia and urea productions, keeping the NH3/CO2 ratio equal to 3 to reduce the unreacted CO2 and NH3, and the two reactors' temperature in the suitable operating ranges due to the change in reactor parameters or external disturbance. Simulation results of the three controllers are compared. Comparative analysis proves the effectiveness of the suggested Adaptive neurofuzzy sliding mode controller than the two other controllers according to external disturbance and the change of parameters. Moreover, the suggested methods when compared with other controllers in the literature show great success in overcoming the external disturbance and the change of parameters. (C) 2016 The Chemical Industry and Engineering Society of China, and Chemical Industry Press. All rights reserved.
机构:
Int Islamic Univ, Fac Engn, Mechatron Engn Dept, POB 10, Kuala Lumpur 50728, MalaysiaInt Islamic Univ, Fac Engn, Mechatron Engn Dept, POB 10, Kuala Lumpur 50728, Malaysia
Salami, Momoh-Jimoh E.
Danzomo, Bashir Ahmed
论文数: 0引用数: 0
h-index: 0
机构:
Int Islamic Univ, Fac Engn, Mechatron Engn Dept, POB 10, Kuala Lumpur 50728, MalaysiaInt Islamic Univ, Fac Engn, Mechatron Engn Dept, POB 10, Kuala Lumpur 50728, Malaysia
机构:Univ Iowa, Ctr Comp Aided Design, Engn Res Facil 111, Iowa City, IA 52246 USA
Zhang, Yun-Qing
Zhao, Yong-Sheng
论文数: 0引用数: 0
h-index: 0
机构:Univ Iowa, Ctr Comp Aided Design, Engn Res Facil 111, Iowa City, IA 52246 USA
Zhao, Yong-Sheng
Yang, Jingzhou
论文数: 0引用数: 0
h-index: 0
机构:
Univ Iowa, Ctr Comp Aided Design, Engn Res Facil 111, Iowa City, IA 52246 USAUniv Iowa, Ctr Comp Aided Design, Engn Res Facil 111, Iowa City, IA 52246 USA
Yang, Jingzhou
Chen, Li-Ping
论文数: 0引用数: 0
h-index: 0
机构:Univ Iowa, Ctr Comp Aided Design, Engn Res Facil 111, Iowa City, IA 52246 USA