Interfacial reaction between SAC305 lead-free solders and ENImAg surface finish and bare copper

被引：6
|
作者：
Adawiyah, M. A. Rabiatul [1 ]
Azlina, O. Saliza [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Fac Mech & Mfg Engn, Parit Raja 86400, Johor, Malaysia
来源：
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 2017年 / 48卷 / 3-4期
关键词：
Electroless nickel; immersion silver; lead-free solder; reflow soldering; intermetallic compound; surface finish; IMMERSION SILVER; SHEAR-STRENGTH; LAYER; SN; SNAGCU;
D O I：
10.1002/mawe.201600764
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Different surface finishes on printed circuit board strongly influence the formation of intermetallic compounds (IMCs), and solder joint reliability. In this paper the effect of two different substrates namely electroless nickel/immersion silver (ENImAg) and bare copper on interfacial reaction when exposed to a reflow soldering process are presented. The result revealed that the black line nickel disappeared on the electroless nickel/immersion silver surface finish after the plating process. Subsequently, the intermetallic compound formed on electroless nickel/immersion silver surface finish are (Cu,Ni)(6)Sn-5,Sn- and (Ni,Cu)(3)Sn-4 with a chuck-shape, rode-type, and needle-shape after reflow soldering. Meanwhile, only Cu6Sn5 layer is found on bare copper with a spherical-shape. The results also indicated that different surface finishes are affected by the growth of intermetallic formation and shear strength, where tin-3.0silver-copper0.5/copper (SAC305/Cu) produced a thicker intermetallic layer, larger grain size, and less shear strength compared with tin-3.0silver-copper0.5/electroless nickel immersion silver (SAC305/ENImAg) surface finish.
引用
收藏
页码：235 / 240
页数：6
相关论文
共 50 条
  • [41] Physical properties of Sn58Bi-xNi lead-free solder and its interfacial reaction with copper substrate
    Kanlayasiri, Kannachai
    Ariga, Tadashi
    MATERIALS & DESIGN, 2015, 86 : 371 - 378
  • [42] Interfacial reaction and IMC growth between the undercooled liquid lead-free solder and Cu metallization
    Zhou, Min-Bo
    Feng, Jian-Qiang
    Yue, Wu
    Zhang, Xin-Ping
    2016 17TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2016, : 1023 - 1027
  • [43] Interfacial reaction between eutectic Sn-58Bi lead-free solder and electroless Ni-P plating
    Li, F
    Liu, CZ
    Xian, AP
    Shang, JK
    ACTA METALLURGICA SINICA, 2004, 40 (08) : 815 - 821
  • [44] Wetting and Intermetallic Study between Sn-3.5Ag-1.0Cu-xZn Lead-free Solders and Copper Substrate (x=0, 0.1, 0.4, 0.7)
    Mayappan, Ramani
    SOLID STATE SCIENCE AND TECHNOLOGY XXVI, 2012, 501 : 150 - 154
  • [45] Interfacial reaction, ball shear strength and fracture surface analysis of lead-free solder joints prepared using cobalt nanoparticle doped flux
    Sujan, G. K.
    Haseeb, A. S. M. A.
    Nishikawa, Hiroshi
    Amalina, M. A.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 695 : 981 - 990
  • [46] Effects of metallic nanoparticle doped flux on the interfacial intermetallic compounds between lead-free solder ball and copper substrate
    Sujan, G. K.
    Haseeb, A. S. M. A.
    Afifi, A. B. M.
    MATERIALS CHARACTERIZATION, 2014, 97 : 199 - 209
  • [47] Morphology and growth kinetics of intermetallic compounds in solid-state interfacial reaction of electroless Ni-P with Sn-based lead-free solders
    Huang, ML
    Loeher, T
    Manessis, D
    Boettcher, L
    Ostmann, A
    Reichl, H
    JOURNAL OF ELECTRONIC MATERIALS, 2006, 35 (01) : 181 - 188
  • [48] Significantly retarded interfacial reaction between an electroless Ni-W-P metallization and lead-free Sn-3.5Ag solder
    Yang, Ying
    Balaraju, J. N.
    Chong, Ser Choong
    Xu, Hui
    Liu, Changqing
    Silberschmidt, Vadim V.
    Chen, Zhong
    JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 565 : 11 - 16
  • [49] Morphology and growth kinetics of intermetallic compounds in solid-state interfacial reaction of electroless Ni-P with Sn-based lead-free solders
    M. L. Huang
    T. Loeher
    D. Manessis
    L. Boettcher
    A. Ostmann
    H. Reichl
    Journal of Electronic Materials, 2006, 35 : 181 - 188
  • [50] Interfacial reactions and mechanical properties between Sn-4.0Ag-0.5Cu and Sn-4.0Ag-0.5Cu-0.05Ni-0.01Ge lead-free solders with the Au/Ni/Cu substrate
    Yen, Yee-Wen
    Chiang, Yu-Cheng
    Jao, Chien-Chung
    Liaw, Da-Wei
    Lo, Shao-cheng
    Lee, Chiapyng
    JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (13) : 4595 - 4602
12345