Interfacial reaction between SAC305 lead-free solders and ENImAg surface finish and bare copper

被引：6
|
作者：
Adawiyah, M. A. Rabiatul [1 ]
Azlina, O. Saliza [1 ]
机构：
[1] Univ Tun Hussein Onn Malaysia, Fac Mech & Mfg Engn, Parit Raja 86400, Johor, Malaysia
来源：
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK | 2017年 / 48卷 / 3-4期
关键词：
Electroless nickel; immersion silver; lead-free solder; reflow soldering; intermetallic compound; surface finish; IMMERSION SILVER; SHEAR-STRENGTH; LAYER; SN; SNAGCU;
D O I：
10.1002/mawe.201600764
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Different surface finishes on printed circuit board strongly influence the formation of intermetallic compounds (IMCs), and solder joint reliability. In this paper the effect of two different substrates namely electroless nickel/immersion silver (ENImAg) and bare copper on interfacial reaction when exposed to a reflow soldering process are presented. The result revealed that the black line nickel disappeared on the electroless nickel/immersion silver surface finish after the plating process. Subsequently, the intermetallic compound formed on electroless nickel/immersion silver surface finish are (Cu,Ni)(6)Sn-5,Sn- and (Ni,Cu)(3)Sn-4 with a chuck-shape, rode-type, and needle-shape after reflow soldering. Meanwhile, only Cu6Sn5 layer is found on bare copper with a spherical-shape. The results also indicated that different surface finishes are affected by the growth of intermetallic formation and shear strength, where tin-3.0silver-copper0.5/copper (SAC305/Cu) produced a thicker intermetallic layer, larger grain size, and less shear strength compared with tin-3.0silver-copper0.5/electroless nickel immersion silver (SAC305/ENImAg) surface finish.
引用
收藏
页码：235 / 240
页数：6
相关论文
共 50 条
  • [21] Interfacial Reactions between Lead-free solders and Cu-40Zn Alloys
    Yen, Yee-Wen
    Chen, Pei-Yu
    Chen, Guan-Da
    2017 INTERNATIONAL CONFERENCE ON ELECTRONICS PACKAGING (ICEP), 2017, : 549 - 550
  • [22] Interfacial reactions between lead-free SnAgCu solder and Ni(P) surface finish on printed circuit boards
    Zeng, KJ
    Vuorinen, V
    Kivilahti, JK
    IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING, 2002, 25 (03): : 162 - 167
  • [23] Influence of Ni and Cu electrodeposits on the interfacial reaction between SAC305 solder and the Bi2(Te,Se)3 thermoelectric material
    Cheng, Jinxuan
    Hu, Xiaowu
    Li, Qinglin
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2019, 30 (15) : 14791 - 14804
  • [24] Effects of the surface roughness on wetting properties and interfacial reactions between SAC305 solder and Cu substrate with Ni-W-P coating
    Cheng, Jinxuan
    Hu, Xiaowu
    Li, Shuang
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2020, 31 (18) : 15086 - 15096
  • [25] Interfacial reactions between electroplated Ni-Zn alloy films and lead-free solders
    Chia, Pay Ying
    Haseeb, A. S. Md Abdul
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2013, 24 (09) : 3423 - 3429
  • [26] Investigation of microstructure and wetting behavior of Sn-3.0Ag-0.5Cu (SAC305) lead-free solder with additions of 1.0 wt % SiC on copper substrate
    Pal, Manoj Kumar
    Gergely, Greta
    Koncz-Horvath, Daniel
    Gacsi, Zoltan
    INTERMETALLICS, 2021, 128
  • [27] Microstructure, Mechanical Property and Interfacial Reaction of Sn-Cu Based Multicomponent Lead-Free Solders
    Zhao Ning
    Ma Haitao
    Wang Lai
    RARE METAL MATERIALS AND ENGINEERING, 2009, 38 : 107 - 111
  • [28] Interfacial reaction, microstructure and hardness between graphene-coated Cu substrate and SAC305 solder doped with minor Ni during isothermal aging
    Li, Shengli
    Liu, Yang
    Cai, Hongming
    Zhang, Hao
    Sun, Fenglian
    MODERN PHYSICS LETTERS B, 2019, 33 (06):
  • [29] Interfacial reactions between Sn-8Zn-3Bi-xAg lead-free solders and Cu substrate
    Liu, Lijuan
    Zhou, Wei
    Li, Baoling
    Wu, Ping
    JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 482 (1-2) : 90 - 98
  • [30] Interfacial reactions between SAC405 and SACNG lead-free solders with Au/Ni(P)/Cu substrate reflowed using the CO2 laser and hot-air methods
    Yen, Yee-Wen
    Hsiao, Hsien-Ming
    Lo, Shao-Cheng
    Fu, Shu-Mei
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2013, 104 (07) : 637 - 642
12345