Corrosion resistance of HVOF-sprayed coatings for hard chrome replacement

被引:103
作者
Bolelli, Giovanni [1 ]
Giovanardi, Roberto [1 ]
Lusvarghi, Luca [1 ]
Manfredini, Tiziano [1 ]
机构
[1] Univ Modena & Reggio Emilia, Dipartimento Ingn Mat & Ambiente, I-41100 Modena, MO, Italy
关键词
pitting corrosion; polarization; metal matrix composites; SEM; acid corrosion;
D O I
10.1016/j.corsci.2006.03.001
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
HVOF-sprayed coatings (WC-17Co, WC-10Co-4Cr, Co-28Mo-17Cr-3Si) and electrolytic hard chrome (EHC) coatings corrosion resistances have been compared through electrochemical polarization tests (0.1 N HCl, 0.1 N HNO3) and Corrodkote test. EHC coatings passivate in HNO3, but undergo pitting corrosion in HCl and in Corrodkote test too. HVOF coatings do not passivate, but possess more noble corrosion potentials. Both in HNO3 and HCl, they undergo more generalized corrosion, with similar i(corr); crevice corrosion along splat boundaries is sometimes detected after the HCl test. Their i(corr) in 0.1 N HCl solution is lower than in several of EHC coatings. No visible damage in the HVOF coatings has occurred after the Corrodkote test. (c) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3375 / 3397
页数:23
相关论文
共 21 条
[1]  
BOLELLI G, 2004, P 4 AIMETA INT TRIB, P113
[2]   Evaluation of the electrochemical behavior of HVOF-sprayed alloy coatings [J].
Chidambaram, D ;
Clayton, CR ;
Dorfman, MR .
SURFACE & COATINGS TECHNOLOGY, 2004, 176 (03) :307-317
[3]   Corrosion behavior of thermal sprayed WC cermet coatings having various metallic binders in strong acidic environment [J].
Cho, JE ;
Hwang, SY ;
Kim, KY .
SURFACE & COATINGS TECHNOLOGY, 2006, 200 (08) :2653-2662
[4]  
Fischer F, 2001, THERMAL SPRAY 2001: NEW SURFACES FOR A NEW MILLENNIUM, P1131
[5]   Structural changes in high-velocity oxy-fuel thermally sprayed WC-Co coatings for improved corrosion resistance [J].
Godoy, C ;
Lima, MM ;
Castro, MMR ;
Avelar-Batista, JC .
SURFACE & COATINGS TECHNOLOGY, 2004, 188 :1-6
[6]   Wear characteristics of electrolytic hard chrome and thermal sprayed WC-10Co-4Crcoatings sliding against Al-Ni-bronze in air at 21 °C and at-40 °C [J].
Ko, PL ;
Robertson, MF .
WEAR, 2002, 252 (11-12) :880-893
[7]   The replacement of electroplating [J].
Legg, KO ;
Graham, M ;
Chang, P ;
Rastagar, F ;
Gonzales, A ;
Sartwell, B .
SURFACE & COATINGS TECHNOLOGY, 1996, 81 (01) :99-105
[8]  
Legg KO, 2002, SURFACE MODIFICATION TECHNOLOGIES XV, P235
[9]   Evaluation of four high velocity thermal spray guns using WC-10% Co-4% Cr cermets [J].
Legoux, JG ;
Arsenault, B ;
Leblanc, L ;
Bouyer, V ;
Moreau, C .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2002, 11 (01) :86-94
[10]   Investigation on the corrosion process of carbon steel coated by HVOFWC/Co cermets in neutral solution [J].
Monticelli, C ;
Frignani, A ;
Zucchi, F .
CORROSION SCIENCE, 2004, 46 (05) :1225-1237