Electrochemical performance of La2NiO4+δ-Ce0.55La0.45O2-δ as a promising bifunctional oxygen electrode for reversible solid oxide cells

被引:58
作者
Li, Pengzhang [1 ]
Yang, Wei [1 ]
Tian, Chuanjin [1 ]
Zhao, Wenyan [1 ]
Lu, Zhe [2 ]
Xie, Zhipeng [1 ,3 ]
Wang, Chang-An [1 ,3 ]
机构
[1] Jingdezhen Ceram Inst, Sch Mat Sci & Engn, Jingdezhen 333403, Peoples R China
[2] Harbin Inst Technol, Sch Phys, Harbin 150001, Peoples R China
[3] Tsinghua Univ, Sch Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
La2NiO4+δ (LNO); oxygen electrode; electrochemical performance; reversible solid oxide cells (RSOCs);
D O I
10.1007/s40145-020-0445-y
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, La2NiO4+delta-xCe(0.55)La(0.45)O(2-delta) (denoted as LNO-xLDC) with various LDC contents (x = 0, 10, 20, 30, and 40 wt%) were prepared and evaluated as bifunctional oxygen electrodes for reversible solid oxide cells (RSOCs). Compared with the pure LNO, the optimum composition of LNO-30LDC exhibited the lowest polarization resistance (R-p) of 0.53 and 0.12 omega center dot cm(2) in air at 650 and 750 degrees C, respectively. The enhanced electrochemical performance of LNO-30LDC oxygen electrode was mainly attributed to the extended triple phase boundary and more oxygen ionic transfer channels. The hydrogen electrode supported single cell with LNO-30LDC oxygen electrode displayed peak power densities of 276, 401, and 521 mW center dot cm(-2) at 700, 750, and 800 degrees C, respectively. Moreover, the electrolysis current density of the single cell demonstrated 526.39 mA center dot cm(-2) under 1.5 V at 800 degrees C, and the corresponding hydrogen production rate was 220.03 mL center dot cm(-2)center dot h(-1). The encouraging results indicated that LNO-30LDC was a promising bifunctional oxygen electrode material for RSOCs.
引用
收藏
页码:328 / 337
页数:10
相关论文
共 50 条
  • [41] One-pot molten salt synthesis of Ce0.9Gd0.1O2-6@PrBa0.5Sr0.5Co2O5+6 as the oxygen electrode for reversible solid oxide cells
    Wang, Haoran
    Lei, Ze
    Sang, Jingzhe
    Wang, Xiang
    Li, Jiaheng
    Yang, Zhibin
    Peng, Suping
    MATERIALS RESEARCH BULLETIN, 2023, 160
  • [42] Boosting the electrocatalytic activity of NdBaCo2O5+δ via calcium co-doping as bifunctional oxygen electrodes for reversible solid oxide cells
    Jin, Fangjun
    Li, Jiangxin
    Gao, Yuan
    Zhang, Wenjing
    Tian, Yunfeng
    Liu, Fangsheng
    Wang, Xinxin
    Zhai, Cheng
    Ling, Yihan
    FUEL, 2024, 368
  • [43] High performance of intermediate temperature solid oxide electrolysis cells using Nd2NiO4+δ impregnated scandia stabilized zirconia oxygen electrode
    Chen, Ting
    Liu, Minquan
    Yuan, Chun
    Zhou, Yucun
    Ye, Xiaofeng
    Zhan, Zhongliang
    Xia, Changrong
    Wang, Shaorong
    JOURNAL OF POWER SOURCES, 2015, 276 : 1 - 6
  • [44] Preparation of mesoporous La2NiO4/NiO filled activated carbon composite for high performance electrochemical electrodes
    Mei Zhou
    Yafeng Deng
    Xiaojiang Liu
    Wencheng Hu
    Journal of Materials Science: Materials in Electronics, 2015, 26 : 6306 - 6313
  • [45] Oxide composite of La0.3Sr0.7Ti0.3Fe0.7O3-δ and CeO2 as an active fuel electrode for reversible solid oxide cells
    Xu, Jia
    Zhou, Xiaoliang
    Pan, Lu
    Wu, Mengxin
    Sun, Kening
    JOURNAL OF POWER SOURCES, 2017, 371 : 1 - 9
  • [46] Enhancing the performance of traditional La2NiO4+x cathode for proton-conducting solid oxide fuel cells with Zn-doping
    Yang, Xuan
    Xu, Xi
    Wu, Shuai
    Yu, Shoufu
    Bi, Lei
    CERAMICS INTERNATIONAL, 2022, 48 (14) : 19626 - 19632
  • [47] Overstoichiometric oxides Ln2NiO4+δ (Ln = La, Pr or Nd) as oxygen anodic electrodes for solid oxide electrolysis application
    Ogier, Tiphaine
    Mauvy, Fabrice
    Bassat, Jean-Marc
    Laurencin, Jerome
    Mougin, Julie
    Grenier, Jean-Claude
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (46) : 15885 - 15892
  • [48] Mn-doped Ruddlesden-Popper oxide La1.5Sr0.5NiO4+δ as a novel air electrode material for solid oxide electrolysis cells
    Zheng, Yifeng
    Jiang, Huaguo
    Wang, Shun
    Qian, Bin
    Li, Qingshan
    Ge, Lin
    Chen, Han
    CERAMICS INTERNATIONAL, 2021, 47 (01) : 1208 - 1217
  • [49] La2Ni1-xCoxO4+δ (x=0.0, 0.1 and 0.2) based efficient oxygen electrode materials for solid oxide electrolysis cells
    Vibhu, V.
    Vinke, I. C.
    Eichel, R. -A.
    Bassat, J. -M.
    de Haart, L. G. J.
    JOURNAL OF POWER SOURCES, 2019, 444
  • [50] A robust high performance cobalt-free oxygen electrode La0.5Sr0.5Fe0.8Cu0.15Nb0.05O3-δ for reversible solid oxide electrochemical cell
    Zhou, Ning
    Yin, Yi-Mei
    Li, Jingcheng
    Xu, Lei
    Ma, Zi-Feng
    JOURNAL OF POWER SOURCES, 2017, 340 : 373 - 379