Residual strength of GFRP at high-cycle fatigue

被引:8
作者
Andersons, J [1 ]
Korsgaard, J [1 ]
机构
[1] Inst Polymer Mech, LV-1006 Riga, Latvia
关键词
fatigue; residual strength; glass/polyester composite;
D O I
10.1007/BF02329325
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N > 10(6) cycles) appears to correlate Hell with the test results at higher stress levels, which indicates that the strength degradation at the design str-ess level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time.
引用
收藏
页码:395 / 402
页数:8
相关论文
共 50 条
  • [41] Frequency dependence of high-cycle fatigue behavior of CVIC/SiC at room temperature
    Staehler, JM
    Mall, S
    Zawada, LP
    COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (15) : 2121 - 2131
  • [42] Robust high-cycle fatigue stress threshold optimization under uncertain loadings
    de Faria, Alfredo R.
    Frota, Roberto T. C., Jr.
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2012, 9 (05): : 615 - 631
  • [43] The influence of mean strain on the high-cycle fatigue of Nitinol with application to medical devices
    Cao, Hengchu
    Wu, Ming H.
    Zhou, Fei
    McMeeking, Robert M.
    Ritchie, Robert O.
    JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2020, 143
  • [44] High-cycle fatigue of diagonally cracked RC bridge girders: Laboratory tests
    Higgins, Christopher
    Lee, Ae-Young
    Potisuk, Tanarat
    Forrest, Richard W. B.
    JOURNAL OF BRIDGE ENGINEERING, 2007, 12 (02) : 226 - 236
  • [45] Infrared temperature mapping of ULTIMET alloy during high-cycle fatigue tests
    Wang, H
    Jiang, L
    Liaw, PK
    Brooks, CR
    Klarstrom, DL
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (04): : 1307 - 1310
  • [46] High-cycle fatigue and durability of polycrystalline silicon thin films in ambient air
    Muhlstein, CL
    Brown, SB
    Ritchie, RO
    SENSORS AND ACTUATORS A-PHYSICAL, 2001, 94 (03) : 177 - 188
  • [47] Subcritical growth of high-cycle fatigue cracks in finite thin isotropic plates
    V. P. Golub
    E. A. Panteleev
    International Applied Mechanics, 2000, 36 : 938 - 947
  • [48] A phase field model for high-cycle fatigue: Total-life analysis
    Golahmar, Alireza
    Niordson, Christian F.
    Martinez-Paneda, Emilio
    INTERNATIONAL JOURNAL OF FATIGUE, 2023, 170
  • [49] Correlation Characteristics of the Deformation Relief of an Aluminum Alloy Under High-Cycle Fatigue
    Pysarenko, G. G.
    Byalonovych, A. V.
    Matokhnyuk, L. E.
    Voinalovych, O. V.
    Lymanskyi, I. V.
    Gopkalo, O. E.
    Mailo, A. M.
    STRENGTH OF MATERIALS, 2024, 56 (01) : 1 - 10
  • [50] HIGH-CYCLE (FATIGUE) RESISTANCE OF REINFORCED-CONCRETE BEAMS WITH LAP SPLICES
    REZANSOFF, T
    ZACARUK, JA
    AFSETH, JG
    CANADIAN JOURNAL OF CIVIL ENGINEERING, 1993, 20 (04) : 642 - 649