Residual strength of GFRP at high-cycle fatigue

被引:8
作者
Andersons, J [1 ]
Korsgaard, J [1 ]
机构
[1] Inst Polymer Mech, LV-1006 Riga, Latvia
关键词
fatigue; residual strength; glass/polyester composite;
D O I
10.1007/BF02329325
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N > 10(6) cycles) appears to correlate Hell with the test results at higher stress levels, which indicates that the strength degradation at the design str-ess level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time.
引用
收藏
页码:395 / 402
页数:8
相关论文
共 50 条
  • [31] High-cycle fatigue testing of Pb-free solder joints
    Barry, N.
    Jones, I. P.
    Hirst, T.
    Fox, I. M.
    Robins, J.
    SOLDERING & SURFACE MOUNT TECHNOLOGY, 2007, 19 (02) : 29 - 38
  • [32] High-cycle fatigue behavior of beta-titanium orthodontic wires
    Murakami, Takashi
    Iijima, Masahiro
    Muguruma, Takeshi
    Yano, Fumiaki
    Kawashima, Isao
    Mizoguchi, Itaru
    DENTAL MATERIALS JOURNAL, 2015, 34 (02) : 189 - 195
  • [33] Nucleation of slip bands near twin boundary in high-cycle fatigue
    Sumigawa, T
    Kitamura, T
    JSME INTERNATIONAL JOURNAL SERIES A-SOLID MECHANICS AND MATERIAL ENGINEERING, 2004, 47 (02) : 98 - 105
  • [34] Change of dislocation substructures upon high-cycle fatigue of stainless steel
    Gromova, A. V.
    Ivanov, Yu F.
    Vorob'ev, S. V.
    Konovalov, S. V.
    Sosnin, O. V.
    RUSSIAN PHYSICS JOURNAL, 2009, 52 (03) : 265 - 268
  • [35] High-cycle fatigue and tensile strength of AZ91 Mg alloy with MAO-epoxy duplex coating
    Karabudak, Filiz
    KOVOVE MATERIALY-METALLIC MATERIALS, 2023, 61 (02): : 81 - 90
  • [36] Enhancing the high-cycle fatigue strength of Mg-9Al-1Zn casting by friction stir processing
    Ni, D. R.
    Wang, D.
    Feng, A. H.
    Yao, G.
    Ma, Z. Y.
    SCRIPTA MATERIALIA, 2009, 61 (06) : 568 - 571
  • [37] NIMS fatigue data sheet on low- and high-cycle fatigue properties of boron steel
    Furuya, Yoshiyuki
    Nishikawa, Hideaki
    Hirukawa, Hisashi
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS-METHODS, 2024, 4 (01):
  • [38] Low-Cycle Thermal Fatigue and High-Cycle Vibration Fatigue Life Estimation of a Diesel Engine Exhaust Manifold
    Sissa, Simone
    Giacopini, Matteo
    Rosi, Roberto
    XVII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM17), 2014, 74 : 105 - 112
  • [39] Further considerations on the high-cycle fatigue of micron-scale polycrystalline silicon
    Alsem, D. H.
    Muhlstein, C. L.
    Stach, E. A.
    Ritchie, R. O.
    SCRIPTA MATERIALIA, 2008, 59 (09) : 931 - 935
  • [40] A review on high-cycle fatigue size effect of selective laser melted metals
    Zhao, Qia
    Yao, Weixing
    Cao, Jing
    Wang, Boda
    Tao, Yuan
    Dai, Zhen
    APPLIED MATERIALS TODAY, 2024, 40