Residual strength of GFRP at high-cycle fatigue

被引:8
作者
Andersons, J [1 ]
Korsgaard, J [1 ]
机构
[1] Inst Polymer Mech, LV-1006 Riga, Latvia
关键词
fatigue; residual strength; glass/polyester composite;
D O I
10.1007/BF02329325
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Degradation of the residual strength of a glass-fiber-reinforced polyester composite of a lay-up typical of the wind rotor blade material is studied at low-cycle fatigue. A gradual reduction of the residual strength is observed as expected for GRP, accompanied by an increasing scatter of strength. The residual strength model based on the strength-life equal rank assumption yields an accurate approximation of experimental data. The strength reduction at a stress level corresponding to high-cycle fatigue (N > 10(6) cycles) appears to correlate Hell with the test results at higher stress levels, which indicates that the strength degradation at the design str-ess level can be evaluated using low-cycle tests. Assuming that the parameters of the strength degradation model do not depend on the applied stress level, the residual strength data obtained in low stress level tests of comparatively short duration can be used to estimate the average fatigue life at the same stress thus reducing the total test time.
引用
收藏
页码:395 / 402
页数:8
相关论文
共 50 条
  • [21] AUTOFRETTAGE AND ITS IMPACT ON HIGH-CYCLE FATIGUE OF HYDRAULIC COMPONENTS
    Rambaks, Andris
    Bauer, Niklas
    Knipper, Paul
    Schmitz, Katharina
    PROCEEDINGS OF BATH/ASME 2022 SYMPOSIUM ON FLUID POWER AND MOTION CONTROL, FPMC2022, 2022,
  • [22] HIGH-CYCLE FATIGUE OF SILVER-HALIDE INFRARED FIBERS
    GERMAN, A
    BARKAY, N
    KATZIR, A
    APPLIED OPTICS, 1994, 33 (13): : 2734 - 2736
  • [23] High-cycle fatigue cracks in concrete investigated by μCT tomography
    Miarka, Petr
    Seitl, Stanislav
    Klusak, Jan
    Malikova, Lucie
    Mertac, Ildiko
    Bilek, Vlastimil
    10TH INTERNATIONAL CONFERENCE ON MATERIALS STRUCTURE AND MICROMECHANICS OF FRACTURE, MSMF, 2023, 43 : 124 - 129
  • [24] High-cycle fatigue resistance in beta-titanium alloys
    S. K. Jha
    K. S. Ravichandran
    JOM, 2000, 52 : 30 - 35
  • [25] High-cycle fatigue bending strength of rapidly solidified and plastic consolidated RS442 aluminium alloy
    Maciej Motyka
    Tomasz Tokarski
    Waldemar Ziaja
    Henryk Dybiec
    Jan Sieniawski
    Journal of Materials Science, 2013, 48 : 4796 - 4800
  • [26] High-cycle fatigue behavior of high-nitrogen austenitic stainless steel
    Dai, Qixun
    Yuan, Zhizhong
    Chen, Xi
    Chen, Kangmin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 517 (1-2): : 257 - 260
  • [27] High-cycle and low-cycle fatigue characteristics of multilayered dissimilar titanium alloys
    Li, Tianle
    Fan, Wei
    Li, Xifeng
    Wu, Huiping
    An, Dayong
    Hu, Qi
    Chen, Jun
    INTERNATIONAL JOURNAL OF PLASTICITY, 2024, 179
  • [28] Change of dislocation substructures upon high-cycle fatigue of stainless steel
    A. V. Gromova
    Yu. F. Ivanov
    S. V. Vorob’ev
    S. V. Konovalov
    O. V. Sosnin
    Russian Physics Journal, 2009, 52 : 265 - 268
  • [29] High-cycle fatigue life prediction of reinforced concrete deep beams
    Isojeh, Benard
    El-Zeghayar, Maria
    Vecchio, Frank J.
    ENGINEERING STRUCTURES, 2017, 150 : 12 - 24
  • [30] Creation of a Life Prediction Model for Combined High-Cycle Fatigue and Creep
    Bouchenot, Thomas
    Patel, Kirtan
    Gordon, Ali P.
    Shinde, Sachin
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2023, 145 (03):