Transformation of the Structure and Parameters of Phases during Aging of a Titanium Ti-10V-2Fe-3Al Alloy and Their Relation to Strengthening

被引：7
作者：
Zhelnina, A. V. [1 ]
Kalienko, M. S. [1 ,2 ]
Illarionov, A. G. [2 ,3 ]
Shchetnikov, N. V. [1 ]
机构：
[1] PAO Corp VSMPO AVISMA, Verkhnyaya Salda 624760, Russia
[2] Ural Fed Univ, Inst Nat Sci & Math, Ekaterinburg 620002, Russia
[3] Russian Acad Sci, Ural Branch, Mikheev Inst Met Phys, Ekaterinburg 620108, Russia
来源：
PHYSICS OF METALS AND METALLOGRAPHY | 2020年 / 121卷 / 12期
关键词：
Ti-10V-2Fe-3Al alloy; quenching; aging; structure; phase composition; chemical composition of phases; precipitation strengthening; hardness;
D O I：
10.1134/S0031918X20120133
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Scanning electron microscopy, electron microprobe and X-ray diffraction analyses, and durometry are used to study changes in the structure, phase composition, and hardness of a quenched titanium Ti-10V-2Fe-3Al alloy in the course of aging at 500 degrees C for 2-32 h. A complex analysis of changes in the lattice parameters of the primary and secondary alpha phases formed in the alloy during aging has been performed for the first time using full-profile X-ray diffraction analysis. Aging-induced changes in the hardness of the alloy are shown to be determined both by the sizes of formed secondary alpha-phase particles and changes in the alloying of the matrix beta solid solution.
引用
收藏
页码：1220 / 1226
页数：7
相关论文
共 38 条
  • [31] COMPARISON OF THE STRUCTURE AND PROPERTIES OF A TUBE FROM TITANIUM ALLOY Ti-3% Al-2.5% V WITH RESULTS OF DIGITALIZATION OF THE PROCESS OF ITS PRESSING
    Vodolazskii, F. V.
    Illarionov, A. G.
    Loginov, Yu N.
    Kosmatskii, Ya, I
    Postylyakov, A. Yu
    METAL SCIENCE AND HEAT TREATMENT, 2022, 64 (7-8) : 458 - 464
  • [32] ω-Assisted nucleation and growth of α precipitates in the Ti-5Al-5Mo-5V-3Cr-0.5Fe β titanium alloy
    Nag, S.
    Banerjee, R.
    Srinivasan, R.
    Hwang, J. Y.
    Harper, M.
    Fraser, H. L.
    ACTA MATERIALIA, 2009, 57 (07) : 2136 - 2147
  • [33] The Decomposition of the Metastable Beta Phase in High-Strength Titanium Alloys VST5553, Ti–10V–2Fe–3Al, and BETA-21S
    M. S. Kalienko
    A. V. Zhelnina
    A. A. Popov
    Physics of Metals and Metallography, 2023, 124 : 916 - 922
  • [34] Stress-induced martensitic transformation during cold rolling of metastable β Ti-5Al-5V-5Mo-3Cr alloy
    Arohi, Adya Charan
    Shekhar, Shashi
    Sen, Indrani
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 911
  • [35] Effect of β phase stability at room temperature on mechanical properties in β-rich α plus β type Ti-4.5Al-3V-2Mo-2Fe alloy
    Gunawarman
    Niinomi, M
    Eylon, D
    Fujishiro, S
    Ouchi, C
    ISIJ INTERNATIONAL, 2002, 42 (02) : 191 - 199
  • [36] Investigation on solid-state phase transformation in a Ti-47Al-2Cr-2V alloy due to thermal cycling during laser additive manufacturing process
    Wu, Yu
    Zhang, Shuquan
    Cheng, Xu
    Wang, Huaming
    JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 799 : 325 - 333
  • [37] Strengthening and Toughening Mechanisms of Precipitation-Hardened Fe53Mn15Ni15Cr10Al4Ti2C1 High-Entropy Alloy
    Sun Shijie
    Tian Yanzhong
    Zhang Zhefeng
    ACTA METALLURGICA SINICA, 2022, 58 (01) : 54 - 66
  • [38] Effect of deformation parameters on microstructure evolution, flow softening behavior and nanoindentation properties of Nb-24Ti-16Si-2Al-4Fe-5V alloy
    Wang, Qibin
    Wang, Qi
    Chen, Ruirun
    Wang, Xiaowei
    Su, Yanqing
    Fu, Hengzhi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 870
1234