Modelling of the Ni(II) removal from aqueous solutions onto grape stalk wastes in fixed-bed column

Grape stalk wastes generated in the wine production process were used for the removal of nickel (II) from aqueous solution. The experimental breakthrough curves were obtained in fixed-bed columns. Experiments we carry out in order to evaluate the influence of inlet metal concentration (30 and 70 mg L(-1)) and the regeneration process in a double sorption cycle. The CXTFIT code was used to fit the experimental data and to determine the transport and sorption parameters of the convective-dispersive equation (CDE) and the two-site deterministic non-equilibrium (TSM/CDE) model by adjusting the models to the experimental breakthrough curves (BTC). The results showed that bed capacity as well as transport and sorption parameters were affected by the initial metal concentration, at the highest Ni(II) concentration the grape stalks column saturated quickly leading to earlier breakthrough. The sorption capacity of the sorbent was slightly reduced in a double sorption cycle, while the recovery of the metal in the desorption step was ranging between 80% and 85% in both cycles. (C) 2009 Elsevier B.V. All rights reserved.