Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C

被引:13
作者
Liu, Yi-wen [1 ]
Hu, Rui [1 ]
Zhang, Tie-bang [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
关键词
TiAl composite; Ti2AlN; microstructure stability; lamellar structure; precipitation; LAMELLAR TIAL ALLOYS; THERMAL-STABILITY; MECHANICAL-PROPERTIES; NITROGEN; BEHAVIOR; CRYSTALS; EXPOSURE; STRESS; DESIGN; CARBON;
D O I
10.1016/S1003-6326(16)64095-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Microstructure stability of in situ synthesized Ti2AlN/Ti-48Al-2Cr-2Nb composite during aging at 900 degrees C was investigated by XRD, OM and TEM, and the unreinforced Ti-48Al-2Cr-2Nb alloy was also examined for comparison. The result showed that in the TiAl alloy, a(2) lamellae thinned and were broken down, and became discontinuous with increasing aging time. The decomposition of a(2) lamella to gamma which was characterized by parallel decomposition and breakdown of a(2) lamellae led to the degradation of the lamellar structure. While in the composite, lamellar structure remained relatively stable even after aging at 900 degrees C for 100 h. No breakdown of a(2) lamellae except parallel decomposition and precipitation of fine nitride particles was observed. The better microstructural stability of the composite was mainly attributed to the precipitation of Ti2AlN particles at the a(2)/gamma interface which played an important role in retarding the coarsening of lamellar microstructure in the matrix of composite.
引用
收藏
页码:423 / 430
页数:8
相关论文
共 50 条
  • [41] High temperature tensile properties and fracture behavior of Y2O3-bearing Ti-48Al-2Cr-2Nb alloy
    Guo, Yingfei
    Xiao, Shulong
    Chen, Yuyong
    Tian, Jing
    Zheng, Zhuangzhuang
    Xu, Lijuan
    INTERMETALLICS, 2020, 126 (126)
  • [42] Laser additive manufacturing of bimetallic structure from Ti-6Al-4V to Ti-48Al-2Cr-2Nb via vanadium interlayer
    Liu, Zhanqi
    Ma, Ruixin
    Xu, Guojian
    Wang, Wei
    Liu, Jin
    MATERIALS LETTERS, 2020, 263
  • [43] Cracking behavior of Ti-48Al-2Cr-2Nb alloy in powder bed fusion electron beam melting process
    Yim, Seungkyun
    Aoyagi, Kenta
    Bian, Huakang
    Yanagihara, Keiji
    Lei, Yuchao
    Kitamura, Shin-ichi
    Manabe, Hironobu
    Daino, Yohei
    Yamanaka, Kenta
    Chiba, Akihiko
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 320
  • [44] Thermal Shock and Oxidation Behavior of HiPIMS TiAlN Coatings Grown on Ti-48Al-2Cr-2Nb Intermetallic Alloy
    Badini, Claudio
    Deambrosis, Silvia M.
    Padovano, Elisa
    Fabrizio, Monica
    Ostrovskaya, Oxana
    Miorin, Enrico
    D'Amico, Giuseppe C.
    Montagner, Francesco
    Biamino, Sara
    Zin, Valentina
    MATERIALS, 2016, 9 (12)
  • [45] Preparation of low-oxygen-containing Ti-48Al-2Cr-2Nb alloy powder by direct reduction of oxides
    Guo, Xue-yi
    Dong, Zhao-wang
    Xia, Yang
    Liu, Pei-dong
    Liu, Han-ning
    Tian, Qing-hua
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2022, 32 (04) : 1351 - 1361
  • [46] Enhanced vacuum brazing joining between Ti-48Al-2Cr-2Nb/ Ti-22Al-25Nb intermetallic alloys by Zr-free Ti-based filler
    Tian, Hao
    Xiong, Jie
    Zhao, Lei
    Mei, Jun
    Qi, Yan
    Wu, Jun-Wei
    Li, Kai-Kai
    He, Jian-Chao
    Zhang, Tong-Yi
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 33 : 6925 - 6935
  • [47] Creep properties of Ti-48Al-2Cr-2Nb alloy having similarly oriented lamellae with fine lamellar spacing
    Xia, Zhizhou
    Liu, Ronghua
    Shen, Yingying
    Mohammed, Arroussi
    Jia, Qing
    Cui, Yuyou
    Yang, Rui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 861
  • [48] Development and application of a ternary Ti-Al-N interatomic potential for Ti2AlN/TiAl composite
    Liu, Pei
    Han, Xiuli
    Sun, Dongli
    Wang, Qing
    JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 745 : 63 - 74
  • [49] A comprehensive study on the fabrication and characterization of Ti-48Al-2Cr-2Nb preforms manufactured using electron beam melting
    Cakmak, Ercan
    Nandwana, Peeyush
    Shin, Dongwon
    Yamamoto, Yukinori
    Gussev, Maxim N.
    Sen, Indrani
    Seren, M. Hazar
    Watkins, Thomas R.
    Haynes, J. Allen
    MATERIALIA, 2019, 6
  • [50] Influence of an oxidation protective coating upon hot corrosion and mechanical behaviour of Ti-48Al-2Cr-2Nb alloy
    Bacos, M-P
    Thomas, M.
    Raviart, J-L
    Morel, A.
    Mercier, S.
    Josso, P.
    INTERMETALLICS, 2011, 19 (08) : 1120 - 1129