Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C

被引:13
|
作者
Liu, Yi-wen [1 ]
Hu, Rui [1 ]
Zhang, Tie-bang [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
关键词
TiAl composite; Ti2AlN; microstructure stability; lamellar structure; precipitation; LAMELLAR TIAL ALLOYS; THERMAL-STABILITY; MECHANICAL-PROPERTIES; NITROGEN; BEHAVIOR; CRYSTALS; EXPOSURE; STRESS; DESIGN; CARBON;
D O I
10.1016/S1003-6326(16)64095-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Microstructure stability of in situ synthesized Ti2AlN/Ti-48Al-2Cr-2Nb composite during aging at 900 degrees C was investigated by XRD, OM and TEM, and the unreinforced Ti-48Al-2Cr-2Nb alloy was also examined for comparison. The result showed that in the TiAl alloy, a(2) lamellae thinned and were broken down, and became discontinuous with increasing aging time. The decomposition of a(2) lamella to gamma which was characterized by parallel decomposition and breakdown of a(2) lamellae led to the degradation of the lamellar structure. While in the composite, lamellar structure remained relatively stable even after aging at 900 degrees C for 100 h. No breakdown of a(2) lamellae except parallel decomposition and precipitation of fine nitride particles was observed. The better microstructural stability of the composite was mainly attributed to the precipitation of Ti2AlN particles at the a(2)/gamma interface which played an important role in retarding the coarsening of lamellar microstructure in the matrix of composite.
引用
收藏
页码:423 / 430
页数:8
相关论文
共 50 条
  • [31] Influence of oxidation protective SiAl coatings on the tensile and fatigue behavior of Ti-48Al-2Cr-2Nb at elevated temperatures
    Guth, Stefan
    Swadzba, Radoslaw
    Breuner, Christoph
    Bauer, Peter-Philipp
    Nizamoglu, Sarper
    Mendala, Boguslaw
    Radwanski, Krzysztof
    Laska, Nadine
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 858
  • [32] Effect of Substrate Material on the Microstructure, Texture, Phase and Microhardness of a Ti-48Al-2Cr-2Nb Alloy Processed by Laser Melting Deposition
    Liu Zhanqi
    Ma Ruixin
    Wang Wenbo
    Xu Guojian
    Su Yunhai
    RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (07) : 2262 - 2268
  • [33] Effect of building direction on the microstructure and tensile properties of Ti-48Al-2Cr-2Nb alloy additively manufactured by electron beam melting
    Todai, Mitsuharu
    Nakano, Takayoshi
    Liu, Tianqi
    Yasuda, Hiroyuki Y.
    Hagihara, Koji
    Cho, Ken
    Ueda, Minoru
    Takeyama, Masao
    ADDITIVE MANUFACTURING, 2017, 13 : 61 - 70
  • [34] Effect of heat treatment on the microstructure and creep properties of Ti-48Al-2Cr-2Nb alloy produced by selective electron beam melting
    Yue, Hangyu
    Liang, Zhenquan
    Zhang, Feng
    Fang, Lijia
    Chen, Pei
    Xu, Lijuan
    Xiao, Shulong
    Li, Ruifeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 859
  • [35] Microstructure and Mechanical Properties of TiN/Ti2AlN Multilayers
    Ma, Donglin
    Liu, Yao
    Deng, Qiaoyuan
    Li, Yantao
    Leng, Yongxiang
    COATINGS, 2023, 13 (02)
  • [36] Cobalt-doped Ti-48Al-2Cr-2Nb alloy fabricated by cold compaction and pressureless sintering
    Xia, Y.
    Yu, R.
    Schaffer, G. B.
    Qian, M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 574 : 176 - 185
  • [37] Dynamic recrystallization and hot processing map of Ti-48Al-2Cr-2Nb alloy during the hot deformation
    Chen, Xiaofei
    Tang, Bin
    Liu, Dong
    Wei, Beibei
    Zhu, Lei
    Liu, Renci
    Kou, Hongchao
    Li, Jinshan
    MATERIALS CHARACTERIZATION, 2021, 179 (179)
  • [38] Process optimization and tribological behavior of Ti-48Al-2Cr-2Nb prepared by selective electron beam melting
    Yan, Junxia
    Xie, Yuxin
    Ou, Bingxian
    Meng, Xiangwei
    Cai, Bin
    Zhang, Yuwei
    Fang, Shupeng
    ENGINEERING FAILURE ANALYSIS, 2024, 165
  • [39] Ti-48Al-2Cr-2Nb alloys prepared by electron beam selective melting additive manufacturing: Microstructural and tensile properties
    Feng, Jiawen
    Gui, Wanyuan
    Liu, Qian
    Bi, Wenya
    Ren, Xuechong
    Liang, Yongfeng
    Lin, Junpin
    Luan, Benli
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 26 : 9357 - 9369
  • [40] Microstructure and mechanical properties of Ll2-(Al,Cr)3Ti/Ti2AlN composites produced by reactive arc-melting
    Mabuchi, H
    Morimoto, H
    Kakitsuji, A
    Tsuda, H
    Matsui, T
    Morii, K
    SCRIPTA MATERIALIA, 2001, 44 (10) : 2503 - 2508