Microstructure stability of Ti2AlN/Ti-48Al-2Cr-2Nb composite at 900 °C

被引:13
|
作者
Liu, Yi-wen [1 ]
Hu, Rui [1 ]
Zhang, Tie-bang [1 ]
机构
[1] Northwestern Polytech Univ, State Key Lab Solidificat Proc, Xian 710072, Peoples R China
关键词
TiAl composite; Ti2AlN; microstructure stability; lamellar structure; precipitation; LAMELLAR TIAL ALLOYS; THERMAL-STABILITY; MECHANICAL-PROPERTIES; NITROGEN; BEHAVIOR; CRYSTALS; EXPOSURE; STRESS; DESIGN; CARBON;
D O I
10.1016/S1003-6326(16)64095-5
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Microstructure stability of in situ synthesized Ti2AlN/Ti-48Al-2Cr-2Nb composite during aging at 900 degrees C was investigated by XRD, OM and TEM, and the unreinforced Ti-48Al-2Cr-2Nb alloy was also examined for comparison. The result showed that in the TiAl alloy, a(2) lamellae thinned and were broken down, and became discontinuous with increasing aging time. The decomposition of a(2) lamella to gamma which was characterized by parallel decomposition and breakdown of a(2) lamellae led to the degradation of the lamellar structure. While in the composite, lamellar structure remained relatively stable even after aging at 900 degrees C for 100 h. No breakdown of a(2) lamellae except parallel decomposition and precipitation of fine nitride particles was observed. The better microstructural stability of the composite was mainly attributed to the precipitation of Ti2AlN particles at the a(2)/gamma interface which played an important role in retarding the coarsening of lamellar microstructure in the matrix of composite.
引用
收藏
页码:423 / 430
页数:8
相关论文
共 50 条
  • [21] Effect of CNTs Addition on Microstructure and Mechanical Properties of Ti-48Al-2Cr-2Nb Alloy Reinforced by In-situ Ti2AlC 2 AlC
    Tang, Fuhao
    Zhu, Dongdong
    Wang, Xiaohong
    Ma, Tengfei
    Dong, Duo
    RARE METAL MATERIALS AND ENGINEERING, 2024, 53 (07) : 1917 - 1927
  • [22] Anisotropy of microstructure features and tensile properties of Ti-48Al-2Cr-2Nb alloy produced by electron beam powder bed fusion
    Ding, Guoquan
    Zhou, Xin
    Chang, Dongbo
    Gao, Hanyu
    Dang, Mengxiang
    Tian, Ying
    Zhang, Ting
    AIP ADVANCES, 2024, 14 (08)
  • [23] Enhanced creep properties of Y2O3-bearing Ti-48Al-2Cr-2Nb alloys
    Guo, Yingfei
    Tian, Jing
    Xiao, Shulong
    Xu, Lijuan
    Chen, Yuyong
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 809
  • [24] Stability of the nitrogen-deficient Ti2AlN x MAX phase in Ar2+-irradiated (Ti,Al)N/Ti2AlN x multilayers
    Bugnet, M.
    Cabioc'h, T.
    Mauchamp, V.
    Guerin, Ph.
    Marteau, M.
    Jaouen, M.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (20) : 5547 - 5552
  • [25] Friction Welding of Electron Beam Melted -TiAl Alloy Ti-48Al-2Cr-2Nb
    Sankar, G. S.
    Karthik, G. M.
    Mohammad, Ashfaq
    Kumar, Ravi
    Ram, G. D. Janaki
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (01) : 35 - 46
  • [26] Effect of nano Y2O3 addition on microstructure and room temperature tensile properties of Ti-48Al-2Cr-2Nb alloy
    Tian, Jing
    Zhang, Dongdong
    Chen, Yuyong
    Zhang, Guoqing
    Sun, Jianfei
    VACUUM, 2019, 170
  • [27] Effect of Scan Speed on Microstructure and Tensile Properties of Ti-48Al-2Cr-2Nb Alloys Fabricated via Additive Manufacturing
    Cho, Ken
    Sakata, Masahiro
    Yasuda, Hiroyuki Y.
    Todai, Mitsuharu
    Ueda, Minoru
    Takeyama, Masao
    Nakano, Takayoshi
    MATERIALS TRANSACTIONS, 2023, 64 (06) : 1112 - 1118
  • [28] Effect of Scan Speed on Microstructure and Tensile Properties of Ti-48Al-2Cr-2Nb Alloys Fabricated via Additive Manufacturing
    Cho, Ken
    Sakata, Masahiro
    Yasuda, Hiroyuki Y.
    Todai, Mitsuharu
    Ueda, Minoru
    Takeyama, Masao
    Nakano, Takayoshi
    JOURNAL OF THE JAPAN INSTITUTE OF METALS AND MATERIALS, 2024, 88 (09) : 198 - 204
  • [29] Spark Plasma Sintering of Ti-48Al-2Cr-2Nb Alloy Powder and Characterization of an Unexpected Phase
    Xia, Y.
    Zhao, J. L.
    Qian, M.
    JOM, 2019, 71 (08) : 2556 - 2563
  • [30] Mitigating cracking in laser powder bed fusion of Ti-48Al-2Cr-2Nb via introducing massive β phase
    Li, Kuanhe
    Wang, Xianglong
    Brodusch, Nicolas
    Tu, Ganfeng
    MATERIALS CHARACTERIZATION, 2023, 196