Metal transfer characteristics of rotating arc narrow gap horizontal GMAW

被引：34

作者：

Guo, N. ^{[1
]}

Lin, S. B. ^{[1
]}

Zhang, L. ^{[1
]}

Yang, C. L. ^{[1
]}

机构：

[1] Harbin Inst Technol, State Key Lab Adv Welding Prod Technol, Harbin 150001, Peoples R China

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2009年 / 14卷 / 08期

关键词：

Metal transfer; Rotating arc welding; Horizontal welding; Narrow gap welding; SIMULATION; SENSOR; MODEL;

D O I：

10.1179/136217109X12505932584655

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The metal transfer process in rotating arc narrow gap horizontal welding is successfully observed by the high speed photography system. Because of the difference of the arc length induced by the molten pool surface shape in the rotating arc horizontal welding, the metal transfer has certain change regularity. In the weld width direction, the transfer frequency in the area of near both sidewalls is larger than that in the centre of the groove. In a rotating period, the transfer frequency in the downward motion process is larger than that in the upward motion process. The rotating arc process can improve the metal transfer. The results indicated that the centrifugal force induced by the arc rotating has great effect on the globular transfer mode which has lower transfer frequency and larger droplet size. Regarding the spray transfer mode, it has limited effect.

引用

页码：760 / 764

页数：5

共 12 条

[11] Mechanically assisted droplet transfer process in gas metal arc welding [J].

Wu, Y ;

Kovacevic, R .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2002, 216 (04) :555-564

[12] Application of rotating arc system to horizontal narrow gap welding [J].

Yang, C. L. ;

Guo, N. ;

Lin, S. B. ;

Fan, C. L. ;

Zhang, Y. Q. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2009, 14 (02) :172-177

← 1 2 →