Preparation of La(Sr)Ga(Mg)O3 electrolyte film by tape casting method

被引：0
|
作者：
Murata, K [1 ]
Okawa, H [1 ]
Ohara, S [1 ]
Fukui, T [1 ]
Yoshida, H [1 ]
Inagaki, T [1 ]
Miura, K [1 ]
机构：
[1] Japan Fine Ceram Ctr, Atsuta Ku, Nagoya, Aichi 4568587, Japan
来源：
SOLID OXIDE FUEL CELLS VII (SOFC VII) | 2001年 / 2001卷 / 16期
关键词：
D O I：
暂无
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
La0.9Sr0.1Ga0.8Mg0.2O3-delta (LSGM) electrolyte film was prepared for the reduced temperature solid oxide fuel cells (SOFCs). The calcined LSGM powder was mixed in ethanol with organic additives. Then, a green sheet of LSGM was made by a tape casting method from the suspension (doctor blade method) and was fired in air. The resultant LSGM film was about 0.3mm in thickness and its relative density was over 99%. A single cell including the LSGM film was fabricated with Ni-samaria doped ceria (Ni-SDC) cermet anode and La0.6Sr0.4CoO3 (LSCo) cathode, and its electrical performance at 700degreesC to 800degreesC was examined. The maximum power density of about 0.63W/cm(2) was obtained at 800degreesC.
引用
收藏
页码：368 / 374
页数：7
相关论文
共 50 条
  • [1] Processing of (La,Sr)(Ga,Mg)O3 Solid Electrolyte
    Majewski, Peter
    Rozumek, Michael
    Tas, Cuneyt A.
    Aldinger, Fritz
    JOURNAL OF ELECTROCERAMICS, 2002, 8 (01) : 65 - 73
  • [2] Processing of (La,Sr)(Ga,Mg)O3 Solid Electrolyte
    Peter Majewski
    Michael Rozumek
    Cuneyt A. Tas
    Fritz Aldinger
    Journal of Electroceramics, 2002, 8 : 65 - 73
  • [3] Preparation of electrolyte foils La0.85Sr0.15Ga0.85Mg0.15O2.85 (LSGM) by means of tape casting
    Shi, M
    Liu, N
    Xu, YD
    Wang, C
    Yuan, YR
    Majewski, P
    Aldinger, F
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 169 (02) : 179 - 183
  • [4] Performance of intermediate temperature solid oxide fuel cells with La(Sr)Ga(Mg)O3 electrolyte film
    Fukui, T
    Ohara, S
    Murata, K
    Yoshida, H
    Miura, K
    Inagaki, T
    JOURNAL OF POWER SOURCES, 2002, 106 (1-2) : 142 - 145
  • [5] Fabrication of multilayer ceramic structure for fuel cell based on La(Sr)Ga(Mg)O3–La(Sr)Fe(Ga)O3 cathode
    A. V. Nikonov
    N. B. Pavzderin
    S. N. Shkerin
    O. I. Gyrdasova
    A. S. Lipilin
    Russian Journal of Applied Chemistry, 2017, 90 : 369 - 373
  • [6] PROCESSING OF (La,Sr)(Ga,Mg)O3 SOLID ELECTROLYTE USING AN ENHANCED SOLID STATE TECHNIQUE
    Fruth, Victor
    Andronescu, Cristian
    Hornoiu, Cristian
    Tenea, Ecaterina
    Rusu, Adriana
    Scurtu, Rares
    REVISTA ROMANA DE MATERIALE-ROMANIAN JOURNAL OF MATERIALS, 2011, 41 (01): : 56 - 63
  • [7] Electrophoretic deposition of a high performance La(Sr)Ga(Mg)O3 electrolyte film for a low temperature solid oxide fuel cell
    Matsuda, M
    Ohara, O
    Miyake, M
    Murata, K
    Fukui, T
    Ohara, S
    CHARACTERIZATION AND CONTROL OF INTERFACES FOR HIGH QUALITY ADVANCED MATERIALS, 2005, 146 : 269 - 275
  • [8] Preparation and electrical conductivity of common impurity phases in (La,Sr)(Ga,Mg)O3 solid electrolytes
    Rozumek, M
    Majewski, R
    Aldinger, F
    Künstler, K
    Tomandl, G
    CFI-CERAMIC FORUM INTERNATIONAL, 2003, 80 (04): : E35 - E40
  • [9] Preparation and Characterization of La0.8Sr0.2Ga0.8Mg0.2O3-δ Film by Electrophoretic Deposition Method
    Toriyama, Araki
    Myoujin, Kenichi
    Kodera, Takayuki
    Ogihara, Takashi
    ELECTROCERAMICS IN JAPAN XIII, 2010, 445 : 86 - 90
  • [10] An intermediate temperature solid oxide fuel cell using a La(Sr)Ga(Mg)O3 thin film prepared by pulsed laser deposition as electrolyte
    Yan, JW
    Enoki, M
    Matsumoto, H
    Ishihara, T
    ELECTROCHEMISTRY, 2005, 73 (11) : 945 - 950
12345