Analysis of residual stresses in particulate reinforced aluminium matrix composite after EDM

被引：18

作者：

Sidhu, S. S. ^{[1
,2
]}

Batish, A. ^{[3
]}

Kumar, S. ^{[4
]}

机构：

[1] BCET, Dept Mech Engn, Gurdaspur, India

[2] BCET, Dept Mech Engn, Gurdaspur, India

[3] Thapar Univ, Dept Mech Engn, Patiala 147004, Punjab, India

[4] Punjab Engn Coll, Dept Mech Engn, Chandigarh, India

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2015年 / 31卷 / 15期

关键词：

Electric discharge machining; Metal matrix composites; X-ray diffraction; Residual stress;

D O I：

10.1179/1743284715Y.0000000033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper reports the effect of properties of three types of particulate reinforced metal matrix composite materials (65 vol.-% SiC/A356.2, 10 vol.-%-SiC-5 vol.-% quartz/Al, 30 vol.-% SiC/A359) and machining parameters on residual stresses induced in the machined surface during powder mixed electric discharge machining. Three electrode materials (Cu, Gr and Cu-Gr) and three machining parameters, namely, peak current and pulse (on/off) duration, are varied to determine the magnitude of induced residual stresses. The result shows that the workpiece, electrode material properties, and pulse off time significantly contribute in the formation of residual stresses. Concentration of reinforced particulates and matrix conductivity also play a vital role in the development of residual stresses. The deposition of disintegrated particles of composite electrode (Cu-Gr) results in high magnitude of residual stresses.

引用

页码：1850 / 1859

页数：10

共 27 条

[1] Measurement of microscopic stress distribution of multilayered composite by X-ray stress analysis [J].

Adachi, T ;

Sekino, T ;

Nakayama, T ;

Kusunose, T ;

Niihara, K .

MATERIALS LETTERS, 2003, 57 (20) :3057-3062

[2] EDM of hybrid Al-SiCp-B4Cp and Al-SiCp-Glassp MMCs [J].

Ahamed, A. Riaz ;

Asokan, P. ;

Aravindan, S. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 44 (5-6) :520-528

[3]

Cheng L., 2004, J MATER SCI, V39, P2923

[4] Residual stress state and hardness depth in electric discharge machining: De-ionized water as dielectric liquid [J].

Ekmekci, B ;

Elkoca, O ;

Tekkaya, AE ;

Erden, A .

MACHINING SCIENCE AND TECHNOLOGY, 2005, 9 (01) :39-61

[5] Residual stresses and white layer in electric discharge machining (EDM) [J].

Ekmekci, Buelent .

APPLIED SURFACE SCIENCE, 2007, 253 (23) :9234-9240

[6]

Fitzpatrick M.E., 2005, NATL MEASUREMENT GOO, P5

[7]

Hauk V, 1997, STRUCTURAL AND RESIDUAL STRESS ANALYSIS BY NONDESTRUCTIVE METHODS, P3, DOI 10.1016/B978-044482476-9/50003-7

[8] Preliminary study of material removal in electrical-discharge machining of SiC/Al [J].

Hocheng, H ;

Lei, WT ;

Hsu, HS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 63 (1-3) :813-818

[9]

Kruth J. P., 2001, P 13 INT S EL MACH B, P463

[10] Surface modification by electrical discharge machining: A review [J].

Kumar, Sanjeev ;

Singh, Rupinder ;

Singh, T. P. ;

Sethi, B. L. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (08) :3675-3687

← 1 2 3 →