Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

被引:1
作者
Liu, Neng [1 ]
Moumanis, Khalid [1 ]
Dubowski, Jan J. [1 ]
机构
[1] Univ Sherbrooke, Lab Quantum Semicond & Photon Based BioNanotechno, Interdisciplinary Inst Technol Innovat, LN2,CNRS UMI 3463, Sherbrooke, PQ J1K 2R1, Canada
来源
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS | 2015年 / 105期
关键词
Engineering; Issue; 105; Silicon; surface wettability; laser-surface interaction; selective area processing; excimer laser; X-ray photoelectron spectroscopy; contact angle; INP/INGAAS/INGAASP MICROSTRUCTURES; WAFER; PHOTOELECTRON; MECHANISMS; ROUGHNESS; EMISSION; GRADIENT; ADHESION; WATER; FILM;
D O I
10.3791/52720
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of biosensing devices. We report on a protocol of using KrF and ArF lasers irradiating Si (001) samples immersed in a liquid environment with low number of pulses and operating at moderately low pulse fluences to induce Si wettability modification. Wafers immersed for up to 4 hr in a 0.01% H2O2/H2O solution did not show measurable change in their initial contact angle (CA) similar to 75 degrees. However, the 500-pulse KrF and ArF lasers irradiation of such wafers in a microchamber filled with 0.01% H2O2/H2O solution at 250 and 65 mJ/cm(2), respectively, has decreased the CA to near 15 degrees, indicating the formation of a superhydrophilic surface. The formation of OH-terminated Si (001), with no measurable change of the wafer's surface morphology, has been confirmed by X-ray photoelectron spectroscopy and atomic force microscopy measurements. The selective area irradiated samples were then immersed in a biotin-conjugated fluorescein-stained nanospheres solution for 2 hr, resulting in a successful immobilization of the nanospheres in the non-irradiated area. This illustrates the potential of the method for selective area biofunctionalization and fabrication of advanced Si-based biosensing architectures. We also describe a similar protocol of irradiation of wafers immersed in methanol (CH3OH) using ArF laser operating at pulse fluence of 65 mJ/cm(2) and in situ formation of a strongly hydrophobic surface of Si (001) with the CA of 103 degrees. The XPS results indicate ArF laser induced formation of Si-(OCH3)(x) compounds responsible for the observed hydrophobicity. However, no such compounds were found by XPS on the Si surface irradiated by KrF laser in methanol, demonstrating the inability of the KrF laser to photodissociate methanol and create -OCH3 radicals.
引用
收藏
页数:10
相关论文
共 50 条
  • [41] Surface Wettability Controllable Polyimides Having Various Functional Groups by UV Light Irradiation
    Tsuda, Yusuke
    JOURNAL OF PHOTOPOLYMER SCIENCE AND TECHNOLOGY, 2017, 30 (02) : 217 - 224
  • [42] Surface Modification of Polymethylmethacrylate (PMMA) by Ultraviolet (UV) Irradiation and IPA Rinsing
    Bae, Geundong
    Park, Taehyun
    Song, In-Hyouk
    MICROMACHINES, 2022, 13 (11)
  • [43] Superhydrophobic ZnO Nanowire Surface: Chemical Modification and Effects of UV Irradiation
    Kwak, Geunjae
    Seol, Minsu
    Tak, Youngjo
    Yong, Kijung
    JOURNAL OF PHYSICAL CHEMISTRY C, 2009, 113 (28) : 12085 - 12089
  • [44] Approximately 30 nm Nanogroove Formation on Single Crystalline Silicon Surface under Pulsed Nanosecond Laser Irradiation
    Lin, Zhenyuan
    Ji, Lingfei
    Hong, Minghui
    NANO LETTERS, 2022, 22 (17) : 7005 - 7010
  • [45] Microcrystal structures in titanium oxide films produced by pulsed UV laser irradiation
    Ichikawa, Y
    Setsune, K
    Kawashima, S
    Kugimiya, K
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, 2001, 40 (10A): : L1054 - L1057
  • [46] Multiscale Surface Patterning of Zirconia by Picosecond Pulsed Laser Irradiation
    Yamamuro, Yuka
    Shimoyama, Tomotaka
    Yamashita, Isao
    Yan, Jiwang
    JOURNAL OF MICRO AND NANO-MANUFACTURING, 2020, 8 (01):
  • [47] Enhancement of the surface properties of selective laser melted maraging steel by large pulsed electron-beam irradiation
    Narayanan, T. S. N. Sankara
    Kim, Jisoo
    Jeong, Hoon Eui
    Park, Hyung Wook
    ADDITIVE MANUFACTURING, 2020, 33
  • [48] Diode laser modification of ceramic material surface properties for improved wettability and adhesion
    Lawrence, J
    Li, L
    Spencer, JT
    APPLIED SURFACE SCIENCE, 1999, 138 : 388 - 393
  • [49] Surface modification of Cl-adsorbed Si(111)-7x7 by the irradiation of infrared pulsed laser
    Kirimura, T
    Shirao, T
    Shudo, K
    Tanaka, Y
    Ishikawa, T
    Tanaka, M
    SURFACE SCIENCE, 2004, 566 : 1137 - 1142
  • [50] Surface structuring of synthetic polymers by UV-laser irradiation. Part IV. Applications of excimer laser induced surface modification of textile materials
    Knittel, D
    Schollmeyer, E
    POLYMER INTERNATIONAL, 1998, 45 (01) : 110 - 117