Selective Area Modification of Silicon Surface Wettability by Pulsed UV Laser Irradiation in Liquid Environment

被引:1
作者
Liu, Neng [1 ]
Moumanis, Khalid [1 ]
Dubowski, Jan J. [1 ]
机构
[1] Univ Sherbrooke, Lab Quantum Semicond & Photon Based BioNanotechno, Interdisciplinary Inst Technol Innovat, LN2,CNRS UMI 3463, Sherbrooke, PQ J1K 2R1, Canada
来源
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS | 2015年 / 105期
关键词
Engineering; Issue; 105; Silicon; surface wettability; laser-surface interaction; selective area processing; excimer laser; X-ray photoelectron spectroscopy; contact angle; INP/INGAAS/INGAASP MICROSTRUCTURES; WAFER; PHOTOELECTRON; MECHANISMS; ROUGHNESS; EMISSION; GRADIENT; ADHESION; WATER; FILM;
D O I
10.3791/52720
中图分类号
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号
07 ; 0710 ; 09 ;
摘要
The wettability of silicon (Si) is one of the important parameters in the technology of surface functionalization of this material and fabrication of biosensing devices. We report on a protocol of using KrF and ArF lasers irradiating Si (001) samples immersed in a liquid environment with low number of pulses and operating at moderately low pulse fluences to induce Si wettability modification. Wafers immersed for up to 4 hr in a 0.01% H2O2/H2O solution did not show measurable change in their initial contact angle (CA) similar to 75 degrees. However, the 500-pulse KrF and ArF lasers irradiation of such wafers in a microchamber filled with 0.01% H2O2/H2O solution at 250 and 65 mJ/cm(2), respectively, has decreased the CA to near 15 degrees, indicating the formation of a superhydrophilic surface. The formation of OH-terminated Si (001), with no measurable change of the wafer's surface morphology, has been confirmed by X-ray photoelectron spectroscopy and atomic force microscopy measurements. The selective area irradiated samples were then immersed in a biotin-conjugated fluorescein-stained nanospheres solution for 2 hr, resulting in a successful immobilization of the nanospheres in the non-irradiated area. This illustrates the potential of the method for selective area biofunctionalization and fabrication of advanced Si-based biosensing architectures. We also describe a similar protocol of irradiation of wafers immersed in methanol (CH3OH) using ArF laser operating at pulse fluence of 65 mJ/cm(2) and in situ formation of a strongly hydrophobic surface of Si (001) with the CA of 103 degrees. The XPS results indicate ArF laser induced formation of Si-(OCH3)(x) compounds responsible for the observed hydrophobicity. However, no such compounds were found by XPS on the Si surface irradiated by KrF laser in methanol, demonstrating the inability of the KrF laser to photodissociate methanol and create -OCH3 radicals.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Selective area in situ conversion of Si (001) hydrophobic to hydrophilic surface by excimer laser irradiation in hydrogen peroxide
    Liu, Neng
    Huang, Xiaohuan
    Dubowski, Jan J.
    JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2014, 47 (38)
  • [2] Surface modification of silicon and PTFE by laser surface treatment: improvement of wettability
    Kim, DY
    Lee, KC
    Lee, C
    FOURTH INTERNATIONAL SYMPOSIUM ON LASER PRECISION MICROFABRICATION, 2003, 5063 : 66 - 70
  • [3] Surface modification of silicon by femtosecond laser ablation in liquid
    Maack, Philipp
    Kanitz, Alexander
    Hoppius, Jan
    Koehler, Jannis
    Esen, Cemal
    Ostendorf, Andreas
    LASER-BASED MICRO- AND NANOPROCESSING XVI, 2022, 11989
  • [4] Effect of Laser Irradiation on the Surface Wettability of Poplar Wood
    Li, Rongrong
    Fang, Lu
    Xu, Wei
    Xiong, Xianqing
    Wang, Xiaodong
    SCIENCE OF ADVANCED MATERIALS, 2019, 11 (05) : 655 - 660
  • [5] Optical properties of silicon microcolumn grown by nanosecond pulsed laser irradiation
    Yaddadene, C.
    Djemaa, A.
    Belaroussi, Y.
    Kerdja, T.
    Gabouze, N.
    Keffous, A.
    Guerbous, L.
    OPTICS COMMUNICATIONS, 2011, 284 (13) : 3308 - 3310
  • [6] Modelling of single UV nanosecond pulsed laser surface modifications of silicon
    Acosta-Zepeda, C.
    Saavedra, P.
    Bonse, J.
    Haro-Poniatowski, E.
    LASER PHYSICS, 2020, 30 (08)
  • [7] Solidification temperature of silicon surface layer melted by pulsed laser irradiation
    Ivlev, GD
    Gatskevich, EI
    APPLIED SURFACE SCIENCE, 1999, 143 (1-4) : 265 - 271
  • [8] Synthesis of Polyimides and their Controlled Surface Wettability by UV Irradiation
    Tsuda, Yusuke
    KOBUNSHI RONBUNSHU, 2017, 74 (01) : 10 - 25
  • [9] Photochemical modification of a diamond surface using a pulsed UV laser as the energy source
    Silva, Mariana
    Santos, Nadia E.
    Pinto, Mariana
    Guieu, Samuel
    Oliveira, Ricardo
    Figueira, Flavio
    Paz, Filipe A. Almeida
    Neto, Miguel
    Rino, Luis
    Deuermeier, Jonas
    Maradiya, Milan
    Liehr, Michael
    Mendes, Joana C.
    Braga, Susana S.
    DIAMOND AND RELATED MATERIALS, 2024, 147
  • [10] Fabrication of controllable wettability of crystalline silicon surfaces by laser surface texturing and silanization
    Yang, Chengjuan
    Jing, Xiubing
    Wang, Fujun
    Ehmann, Kornel F.
    Tian, Yanling
    Pu, Zihao
    APPLIED SURFACE SCIENCE, 2019, 497