Evaluation of commercial nickel oxide powders for components in solid oxide fuel cells

被引:70
作者
Tietz, F [1 ]
Dias, FJ [1 ]
Simwonis, D [1 ]
Stöver, D [1 ]
机构
[1] Forschungszentrum Julich, Res Ctr, Inst Mat & Proc Energy Syst IWV 1, D-52425 Julich, Germany
关键词
anodes; electrical properties; fuel cells; NiO; sintering; ZrO(2);
D O I
10.1016/S0955-2219(99)00271-X
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Various commercial nickel oxides were examined with respect to their relevant powder properties for application as anodes or anode substrates in solid oxide fuel cells (SOFC). The powders were characterized regarding their morphology, grain size distribution, BET surface and sintering behavior. Furthermore, anode substrates were produced from these powders together with yttria-stabilized zirconia (YSZ) powder. The sintering behavior, gas permeability and electrical conductivity of these components were determined and compared with the current standard material used for SOFC development at Research Centre Julich. A comparison of the powder and component properties indicate a significant influence of the powder properties on the components produced. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1023 / 1034
页数:12
相关论文
共 30 条
  • [1] Anderson H. U., 1973, Physics of Sintering, V5, P149
  • [2] THE DIFFUSION OF NI-63 ALONG GRAIN-BOUNDARIES IN NICKEL-OXIDE
    ATKINSON, A
    TAYLOR, RI
    [J]. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1981, 43 (04): : 979 - 998
  • [3] DIFFUSION OF NI IN THE BULK AND ALONG DISLOCATIONS IN NIO SINGLE-CRYSTALS
    ATKINSON, A
    TAYLOR, RI
    [J]. PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1979, 39 (05): : 581 - 595
  • [4] Blum L., 1995, Proceedings of the Fourth International Symposium on Solid Oxide Fuel Cells (SOFC-IV), P163
  • [5] Buchkremer HP, 1997, ELEC SOC S, V97, P160
  • [6] BUCHKREMER HP, 1996, P 2 EUR SOFC FOR OSL, V1, P221
  • [7] EVALUATION OF COMMERCIAL ZIRCONIA POWDERS FOR SOLID OXIDE FUEL-CELLS
    CIACCHI, FT
    CRANE, KM
    BADWAL, SPS
    [J]. SOLID STATE IONICS, 1994, 73 (1-2) : 49 - 61
  • [8] DEHART LGJ, 1996, P 2 EUR SOL OX FUEL, V1, P229
  • [9] Sinterability of commercial 8 mol% yttria-stabilized zirconia powders and the effect of sintered density on the ionic conductivity
    Gibson, IR
    Dransfield, GP
    Irvine, JTS
    [J]. JOURNAL OF MATERIALS SCIENCE, 1998, 33 (17) : 4297 - 4305
  • [10] GUPTA A, UNPUB