Effects of micro/nano CeO2 on the microstructure and properties of WC-10Co cemented carbides

被引：30

作者：

Cai, Huang ^{[1
]}

Jing, Wenwen ^{[1
]}

Guo, Shengda ^{[1
,2
]}

Liu, Lei ^{[1
]}

Ye, Ying ^{[1
]}

Wen, Yan ^{[1
]}

Wu, Yunxuan ^{[1
]}

Wang, Shuilong ^{[2
]}

Huang, Xing ^{[2
]}

Zhang, Jianbo ^{[1
]}

机构：

[1] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou 341000, Peoples R China

[2] Special Tungsten New Mat Engn Technol Res Ctr Jia, Ganzhou 341000, Peoples R China

来源：

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2021年 / 95卷

关键词：

WC-10Co cemented carbide; CeO2; Grain size; Structure; Performance; WC-CO ALLOYS; MECHANICAL-PROPERTIES; CORROSION-RESISTANCE; NI; CU; ANTICORROSION; SIMULATION; COATINGS; ABRASION; BEHAVIOR;

D O I：

10.1016/j.ijrmhm.2020.105432

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

WC-10Co cemented carbide with micro/nano CeO2 additives was obtained through powder metallurgy technology. The effects of CeO2 grain size on the structure and performances were investigated by scanning electron microscope, X-ray diffraction, mechanical properties testers and friction testing machine. The results showed that the grain size of WC decreased after adding micro/nano CeO2, and the refining effect of nano CeO2 was better than that of micro CeO2. The properties of alloys such as Vickers hardness, TRS and fracture toughness increased with the increase of CeO2 additives, and then followed a decrease trend when the content of CeO2 exceeded 0.8%. Furthermore, the content of nano CeO2 greatly affected the cemented carbide and 0.4% of nano CeO2 revealed the strongest improvement on the structure and performances of WC-10Co cemented carbide.

引用

页数：11

共 42 条

[1] Effect of nano-yttria addition on the properties of WC/Co composites
El-Kady, Omayma A. M.
[J]. MATERIALS & DESIGN, 2013, 52 : 481 - 486
[2] Fan JL, 2012, RARE METAL MAT ENG, V41, P256
[3] A new concept in liquid jet erosion: Commissioning and proving trials
Gant, A. J.
Gee, M. G.
Plint, G.
[J]. WEAR, 2007, 263 : 284 - 288
[4] A review of micro-scale abrasion testing
Gant, A. J.
Gee, M. G.
[J]. JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2011, 44 (07)
[5] In situ scratch testing and abrasion simulation of WC/Co
Gee, Mark
Mingard, Ken
Nunn, John
Roebuck, Bryan
Gant, Andrew
[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 62 : 192 - 201
[6] The optimization of mechanical property and corrosion resistance of WC-6Co cemented carbide by Mo2C content
Guo, Shengda
Yan, Wei
Yi, Jianhong
Wang, Shuilong
Huang, Xing
Yang, Surong
Zhang, Menglei
Ye, Yuwei
[J]. CERAMICS INTERNATIONAL, 2020, 46 (11) : 17243 - 17251
[7] The role of Y2O3, Cu, Mo and Mo2C additives on optimizing the corrosion resistance of WC-6Co cemented carbide in HCl and NaOH solutions
Guo, Shengda
Bao, Rui
Li, Shaoyu
Ye, Yuwei
Zhu, Ertao
Wang, Wenjing
Zhang, Yuxin
Chen, Hao
Ye, Ying
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 827
[8] Guo SD, 2018, RARE METAL MAT ENG, V47, P1986, DOI 10.1016/S1875-5372(18)30169-3
[9] Effect of Mo and Y2O3 additions on the microstructure and properties of fine WC-Co cemented carbides fabricated by spark plasma sintering
Guo, Shengda
Bao, Rui
Yang, Jiangao
Chen, Hao
Yi, Jianhong
[J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 69 : 1 - 10
[10] Huang C. G., 2014, MAT SCI ENG POWDER M, V19, P701

← 1 2 3 4 5 →